Crate & Barrel Loop Queen or King Bed Assembly Instruction

LOOP QUEEN AND KING BED

HARDWARE

Thank you for purchasing the Loop Queen and King
Bed. This page

Please take the time to identify the hardware as well as
the individual components
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.

Note: 2 people are required to safely assemble this product.

lists all the contents included in the box.

to this product. As you

COMPONENTS

2 - long
screws

Missing hardware?
Please call 800.606.6387
for replacements.

12 - short
screws

TOOLS REQUIRED

Phillips head screwdriver

1 - footboard

2 - slat rolls

Made in China r03

2 - side rails

(1 left, 1 right)

1 - headboard

1 - center rail

1 With the assistance of another adult, stand headboard
upright. Fit the tabs of the left and right side rails down into

2 - support legs

Customer Service 800.967.6696 | www.crateandbarrel.com

the corresponding slots in the headboard hardware. Firmly
press down on side rails until they securely lock in place.

Page 1 of 2

LOOP QUEEN AND KING BED

2 Fit metal tabs of side rails into corresponding slots in

footboard. Firmly lock each rail into position.

A

B

3 A) Attach 2 support legs to the underside of the center rail
with 2 long screws. Secure, but do not over tighten with a
phillips head screwdriver.
B) Firmly fit metal brackets of the center rail into corresponding
brackets in the head and footboards.

A

Note:

Make sure slats
bow upwards

B

Note:

Secure the first
and last slats to the
assembly before
securing the middle.

middle slats

last slats

4 A. Unroll slat rolls and lay across the
center rails and side rails as shown, making
sure slats bow upwards.

B. Locate the first slats about 1/5” from the
headboard, and screw the first slats to the
support rail with 4 short screws, using a
Phillips head screwdriver.

Pull the last slats tight toward the footboard,
and secure 4 more short screws to the
center rail and side rails.

Using the last 4 short screws, screw the
middle slats with holes down to the center
rail and side rails.

Assembly is now complete.

first slats

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.

Made in China r03

Customer Service 800.967.6696 | www.crateandbarrel.com

Page 2 of 2