Crate & Barrel Loop Plasma Back Panel Assembly Instruction

LOOP PLASMA BACK PANEL

Thank you for purchasing the Loop Plasma Back
Panel. This page lists all the contents included in the

box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.

Note: 2 people are required to safely assemble this product.

HARDWARE

16 - bolts

Missing hardware?
Please call 800.606.6387 for replacements.

TOOLS REQUIRED

phillips head screwdriver

COMPONENTS

1 - back
panel

2 - connecting brackets

1 - media
stand

ASSEMBLY

1 A) With the assistance of another adult, place back panel onto a clean,
padded surface as shown. Attach 2 connecting brackets to back panel
with 4 bolts per bracket. Secure bolts with a phillips head screwdriver.
B) With the assistance of another adult, position unit upright. Attach back

panel onto media stand as shown with 4 bolts per bracket.

A

B

back panel

media stand

Made in China - r04 Page 1 of 2

Customer Service 800.967.6696 | www.crateandbarrel.com

LOOP PLASMA BACK PANEL

NOTE:

This plasma back panel is intended for
placement against a wall using
the enclosed anchoring hardware.
The included hardware is for
mounting the unit to drywall.
Use hardware appropriate to
your wall type.

2 A) Drill a hole in the wall slightly
smaller than the diameter of the
plastic wall anchor. Lightly tap with a
hammer until the face is flush with the
wall.
B) Insert long wood screw through
wall anchor strap and into the wall
anchor.
C) Insert short wood screw through
wall anchor strap and into the top of
unit.
Assembly is now complete.

Short
wood
screw

NOTE: Insert screws 3/4"-1"
from the edge of the strap

Wall
anchor
strap

Long
wood
screw

Wall

Plastic
wall
anchor

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture
wax or polish as the wood is finished with a
protective clear lacquer.

Made in China - r04 Page 2 of 2

Customer Service 800.967.6696 | www.crateandbarrel.com

NOTE: Contact your television manufacturer to
find out the necessary wall mounting bracket and
instructions needed to safely mount your TV.