Crate & Barrel Loop Hutch Top Assembly Instruction

LOOP HUTCH
HARDWARE
Thank you for purchasing the Loop Hutch. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
14 - wood dowels
8 - bracket screws
1 - small screw
Missing hardware? Please call 800.606.6387 for replacements.
14 - cams
4 - shelf pins
1 - large screw
14 - cam screws
2 - brackets
14 - cam covers
1 - plastic anchor
1 - wall strap
TOOLS REQUIRED
phillips head screwdriver
1 - top panel
2 - side frames
(1 left, 1 right)
1 - adjustable shelf
1 - back panel
1 - fixed shelf
Made in China - r05 Page 1 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
LOOP HUTCH
left and right
A
side panels
B
back panel
NOTE: Make sure arrows on each cam points towards nearest edge with holes.
1 A) Insert 2 wood dowels, 5 cam screws and 2 cams into left and right side panels as shown. Make sure arrows on each cam points towards nearest edge with holes. Secure cam screws with a phillips head screwdriver. B) Insert 6 wood dowels and 6 cams into back panel as shown.
left side panel
back panel
2 Fit dowels of back panel into corresponding holes of left side panel as shown. With a screwdriver, turn cams clockwise until it securely engages each cam screw.
fixed shelf
3 Insert 4 cams and 4 wood dowels into fixed shelf as shown.
Made in China - r05 Page 2 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
4 Fit dowels of fixed shelf into corresponding holes of left side panel as shown. Secure 2 cams.
fixed shelf
LOOP HUTCH
top panel
right side panel
5 Fit dowels of assembled unit into corresponding holes of right side panel as shown. Secure 5 cams.
top panel
6 Insert 4 cam screws into underside of top panel as shown.
A
A
B
adjustable
shelf
7 With the assistance of another adult, carefully position unit upright as shown. Fit dowels of assembled unit into corresponding holes of top panel as shown. Secure 4 cams, and cover exposed cams with cam covers.
Made in China - r05 Page 3 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
8 A) Insert 4 shelf pins at desired shelf heights as shown. B) Place adjustable shelf into assembled unit. Make sure shelf is securely supported by shelf pins.
LOOP HUTCH
hutch
9 With the assistance of another adult, carefully place hutch onto file cabinet as shown. Attach 2
brackets to back of assembled unit with 4 bracket screws per bracket as shown. Secure
screws with a screwdriver. Assembly is now complete.
10 Safety Mounting Instructions A. Drill a hole in the wall slightly smaller than the diameter of the plastic wall anchor. Lightly tap with a hammer until the face is flush with the wall. B. Insert large screw through wall anchor strap and into the wall anchor. C. Insert small screw through wall anchor strap and into the top of unit. Mounting assembly is now complete.
small screw
file cabinet
WALL
wall strap
plastic anchor
large screw
NOTE: If you are unsure about your
NOTE: Insert screws 3/4"-1" from the edge of the strap
wall type or what mounting method you should use, consult a qualified professional or your local hardware store.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
Made in China - r05 Page 4 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...