Crate & Barrel Loop Full Bed Assembly Instruction

LOOP FULL BED

HARDWARE

Thank you for purchasing the Loop Full Bed. This
page

lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

to this product. As you unpack

COMPONENTS

1 - long
screw

Missing hardware?
Please call 800.606.6387
for replacements.

12 - short
screws

TOOLS REQUIRED

Phillips head screwdriver

1 - footboard

2 - slat rolls

Made in China r01

2 - side rails

(1 left, 1 right)

1 - headboard

1 - center rail

1 With the assistance of another adult, stand headboard
upright. Fit the tabs of the left and right side rails down into

1 - support leg

Customer Service 800.967.6696 | www.crateandbarrel.com

the corresponding slots in the headboard hardware. Firmly
press down on side rails until they securely lock in place.

Page 1 of 2

LOOP FULL BED

2 Fit metal tabs of side rails into corresponding slots in

footboard. Firmly lock each rail into position.

A

B

3 A) Attach 1 support leg to the underside of the center rail
with 1 long screw. Secure, but do not over tighten with a
phillips head screwdriver.
B) Firmly fit metal brackets of the center rail into corresponding
brackets in the head and footboards.

Note:

Make sure slats
bow upwards

4 Place slat rolls onto center and side rails as shown. Unroll
each slat roll, making sure slats bow upwards.

5 Attach slats to center and side rails with 12 short screws
as shown. Secure each screw with a phillips head
screwdriver.
Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.

Made in China r01

Customer Service 800.967.6696 | www.crateandbarrel.com

Page 2 of 2