Crate & Barrel Loop Desk Assembly Instruction

LOOP DESK
HARDWARE
Thank you for purchasing the Loop Desk. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
6 - wood dowels
4 - silver screws
Missing hardware? Please call 800.606.6387 for replacements.
6 - cams
screws
2 - pulls
6 - bolts6 - cam
TOOLS REQUIRED
allen wrench (included)phillips head screwdriver
2 - side frames
(1 left, 1 right)
1 - desktop assembly
1 - crossbar
Made in China - r08 Page 1 of 3
Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com
LOOP DESK
C
right side panel
E
desktop assembly
drawer
A
1 A) With the assistance of another adult, carefully pull out drawer from desktop assembly as shown. Set drawer aside. B) Insert 4 cams into desktop assembly as shown. Make sure arrows on each cam points toward the nearest edge with holes. C) Insert 2 cam screws and 2 wood dowels to right side panel as shown. Secure, but do not over tighten, the cam screws using
NOTE: Make sure
arrows on each cam
D
point towards
nearest edge with
holes
B
wood dowels
C
cam screws
B
cams
NOTE: Do not over tighten the cam screws or bolts
D
a phillips head screwdriver. D) Fit dowels of right side panel into corresponding holes of each side frame. Using a screwdriver, turn each cam clock­wise until it securely engages the cam screws. E) Secure left side frame to desktop assembly with 3 bolts, using an allen wrench.
E
bolts
B
crossbar
left side panel
A
C
B
A
D
right side panel
desktop assembly
2 A) Insert 2 cam screws and 2 wood dowels to left side panel. B) Insert 1 cam screw and 1 wood dowel into left and right side panel as shown. C) Insert 2 cams into crossbar as shown. D) Fit dowel of right side panel into corresponding hole of
Made in China - r08 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com
E
D E
crossbar as shown. Then, fit dowels of left side panel into
corresponding holes of crossbar and desktop assembly as shown. At this point, secure cams of crossbar and left side panel. E) Secure left side frame to desktop assembly with 3 bolts. At the point, insert drawer into desktop assembly as shown.
LOOP DESK
NOTE: Do not over tighten the screws
pull
3 With the assistance of another adult, carefully position unit upright. Attach 2 pulls to drawer front with 2 screws per pull. Secure screws, but do not over tighten, with a screwdriver.
Assembly is now complete.
drawer
REMOVING DRAWER ASSEMBLY
A) Remove drawer assembly from desk: Fully extend drawer assembly from desk. Locate plastic tabs on left and right drawer glides. With even pressure, simutaneously lift the left tab (A) and press the right tab (B) to release drawer assembly from assembled unit.
A
left drawer glide
B) Attach drawer assembly to desk: Fully extend drawer glides from desk. Fit drawer glides of drawer assembly into corresponding drawer glides of file cabinet. Push drawer assembly forward and listen for a click to ensure that assembly is secure.
right drawer glide
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
B
Made in China - r08 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com
Loading...