Thank you for purchasing the Loop Media Stand. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
24 - cams
8 - shelf
pins
24 - cam
screws
24 - wood
dowels
TOOLS REQUIRED
Phillips head screwdriver
24 - cam
covers
Missing hardware?
Please call 800.606.6387
for replacements.
2 - side panels
(1 left, 1 right)
1 - top panel
Made in China - r07Page 1 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
2 - doors
(1 left, 1 right)
1 - back panel
1 - middle panel
1 - bottom panel
2 - adjustable
shelves
1 - support
leg
LOOP MEDIA STAND
Make sure arrows on each
cam points toward nearest
edge with holes
right side
panel
A
middle
panel
left side
panel
1 Insert 4 cam screws, 2 cams, and 2 wood dowels
into each side panel as shown. Make sure arrows on
each cam points toward nearest edge with holes.
Secure cam screws with a phillips head screwdriver.
back
A
panel
bottom
B
panel
2 A) Insert 4 cams and 4 wood dowels into middle panel as
shown.
B) Insert 2 cam screws and 4 wood dowels into bottom panel as shown.
middle
panel
top
B
panel
bottom
panel
3 A) Insert 8 cams, 4 cams screws and 12 wood dowels into back panel as shown.
B) Insert 10 cams screws into top panel as shown.
4 Place bottom panel onto a clean, padded surface,
and fit middle panel onto cam screws of bottom panel
as shown. With a screwdriver, turn each cam clockÂwise until it securely engages each cam screw.
Made in China - r07Page 2 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
LOOP MEDIA STAND
B
back
panel
A
A
A
bottom
panel
B
5 A. Insert 4 cams into bottom panel assembly as
shown. Make sure arrows on each cam points
towards nearest edge with holes.
B. Fit holes of back panel to cam screws of
assembled unit as shown. Turn each cam clockwise
to secure with a phillips head screwdriver. Make
sure each cam securely engages each cam screw.
A
A
B
bottom
panel
6 A. Position unit face up as shown. Insert 4 cams into
bottom panel as shown. Fit left and right side panels onto
assembled unit as shown. Secure all cams.
B. Attach support leg to assembled unit as shown. Turn leg
clockwise to secure.
A
A
B
B
8 A) Insert 8 shelf pins into assembled unit at desired
7 A) With the assistance of another adult, carefully position
unit upright. Carefully fit top panel onto assembled unit as
shown. Secure all cams.
B) Conceal all exposed cams with cam covers.
Made in China - r07Page 3 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
shelf heights. Press firmly to secure.
B) Place 2 adjustable shelves into assembled unit as
shown. Make sure shelves are securely supported by
each shelf pin.
LOOP MEDIA STAND
back groove of bottom panel
left side
door
front groove of bottom panel
NOTE:
Press the pins on top of
the doors down to install doors.
Press the buttons on the back
to release the pins and lock
the doors into place.
right side
door
9 Attach left door to assembled unit as shown.
Carefully insert wheels of left door into back groove of
bottom panel. Press down the two levers and line up
with the back groove of top panel. Use the buttons to
release levers to secure door. Repeat steps for right door, inserting door into the front grooves instead of
the back.
Assembly is now complete.
B
Once the top rollers are engaged,
adjust the wheel height to secure
and level the doors
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
B
A
A
Push this button down to
remove door
A. If the doors are not operating smoothly, push the buttons
down on the back doors to remove them from the unit as
shown. Ensure that the buttons are locked in the down position
and install the doors again making sure that the wheels on the
bottom are aligned with the correct track on the bottom panel.
Now pivot the door into place ensuring that the pins are
inserted correctly into the tracks in the top panel.
B. To level the door, adjust the wheel height as shown above.
Made in China - r07Page 4 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
LOOP PLASMA BACK PANEL
Thank you for purchasing the Loop Plasma Back
Panel. This page lists all the contents included in the
box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
HARDWARE
16 - bolts
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
phillips head screwdriver
COMPONENTS
1 - back
panel
2 - connecting brackets
1 - media
stand
ASSEMBLY
1 A) With the assistance of another adult, place back panel onto a clean,
padded surface as shown. Attach 2 connecting brackets to back panel
with 4 bolts per bracket. Secure bolts with a phillips head screwdriver.
B) With the assistance of another adult, position unit upright. Attach back
panel onto media stand as shown with 4 bolts per bracket.
A
B
back panel
media stand
Made in China - r04Page 1 of 2
Customer Service 800.967.6696 | www.crateandbarrel.com
LOOP PLASMA BACK PANEL
NOTE:
This plasma back panel is intended for
placement against a wall using
the enclosed anchoring hardware.
The included hardware is for
mounting the unit to drywall.
Use hardware appropriate to
your wall type.
2 A) Drill a hole in the wall slightly
smaller than the diameter of the
plastic wall anchor. Lightly tap with a
hammer until the face is flush with the
wall.
B) Insert long wood screw through
wall anchor strap and into the wall
anchor.
C) Insert short wood screw through
wall anchor strap and into the top of
unit.
Assembly is now complete.
Short
wood
screw
NOTE: Insert screws 3/4"-1"
from the edge of the strap
Wall
anchor
strap
Long
wood
screw
Wall
Plastic
wall
anchor
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture
wax or polish as the wood is finished with a
protective clear lacquer.
Made in China - r04Page 2 of 2
Customer Service 800.967.6696 | www.crateandbarrel.com
NOTE: Contact your television manufacturer to
find out the necessary wall mounting bracket and
instructions needed to safely mount your TV.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.