Crate & Barrel Ledge Twin Bed Assembly Instruction
LEDGE TWIN BED
ASSEMBLY HARDWARE
Thank you for purchasing the Ledge Twin Bed. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
4 - wood
dowels
8 - washers 8 - bolts 6 - screws
Missing hardware? Please call
800.606.6387 for replacements.
TOOLS REQUIRED
hex wrench (included)
phillips head screwdriver
(We recommened the use of hand tools instead of power tools)
1 - headboard 1 - footboard
2 - side rails
(1 left, 1 right)
Made in Thailand - r02 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - slat assembly
LEDGE TWIN BED
left side
rail
A
headboard
NOTE: Do not over
tighten the bolts
headboard
B
1 A) Insert 2 wood dowels into left and right side
rails as shown.
B) With assistance of another adult, fit dowels of side
rails into headboard and footboard as shown.
Secure each corner with 2 bolts and 2 washers, using
a hex wrench. Do not over tighten the bolts.
NOTE: Do not over
tighten the screws
left side
rail
right side
rail
footboard
slat
assembly
CLEANING AND CARE
Clean surfaces with a dry or damp
soft cloth. Do not use abrasive cleaners.
Do not use furniture wax or polish as the
wood is finished with a protective clear
lacquer.
2 Attach slat assembly to bed assembly with 6 screws as shown.
Secure, but do not over tighten, screws with a phillips head screw-
driver.
Assembly is now complete.
Made in Thailand - r02 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...