Crate & Barrel Ledge Nightstand Assembly Instruction
LEDGE NIGHTSTAND
ASSEMBLY HARDWARE
Thank you for purchasing the Ledge Nightstand. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
10 - small
bolts
16 - drawer
screws
6 - large
bolts
4 - adhesive
feet
12 - wood
dowels
12 - small
screws
Missing hardware?
Please call 800.606.6387
for replacements.
TOOLS REQUIRED
allen wrench (included)
phillips head screwdriver
(We recommend the use of hand tools instead power tools)
8 - large
screws
1 - top panel 1 - base
2 - side panels
(1 left, 1 right)
(2 left, 2 right)
Made in Malaysia - r06 Page 1 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - bottom
panel
1 - back panel 2 - drawer
fronts
2 - drawer bottoms4 - drawer sides
1 - fixed
panel
2 - drawer
backs
LEDGE NIGHTSTAND
left and right
side panels
1 Place left and right side panels onto a clean, padded
surface. Insert 6 wood dowels into left and right side
panels as shown.
NOTE: Do not over
tighten screws
base
A
bottom panel
B
adhesive
foot
2 A) Attach base assembly to bottom panel with 8
large screws as shown. Secure, but do not over
tighten, screws using a phillips head screwdriver.
B) Adhere 4 adhesive feet to legs as shown.
NOTE: Allen wrench
can be held at an angle
to allow for full rotation
when securing bolts
left
side
panel
NOTE: Do not over
tighten the bolts
right
side
panel
3 Position base assembly as shown. Fit dowels of left
and right side panels into corresponding holes of bottom
panel as shown. Secure left and right side panels with 3
large bolts per side, using an allen wrench. Do not over
tighten the bolts.
top panel
NOTE: Allen wrench
can be held at an angle
to allow for full rotation
when securing bolts
4 Fit dowels of left and right side panels into
corresponding holes of top panel as shown. Secure
left and right side panels with 3 small bolts per side
as shown, using an allen wrench.
Made in Malaysia - r06 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...