Crate & Barrel Ledge Full-Queen-King Bed Assembly Instruction
LEDGE FULL, QUEEN OR KING BED
ASSEMBLY HARDWARE
Thank you for purchasing the Ledge Full, Queen or King
Bed. This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
4 - wood
dowels
8 - washers 8 - bolts 12 - screws
Missing hardware? Please call
800.606.6387 for replacements.
TOOLS REQUIRED
hex wrench (included)
phillips head screwdriver
(We recommened the use of hand tools instead of power tools)
1 - headboard 1 - center rail1 - footboard
2 - side rails
(1 left, 1 right)
Made in Malaysia - r05 Page 1 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 - center supports2 - slat assemblies
LEDGE FULL, QUEEN OR KING BED
left side
rail
headboard
NOTE: Do not over
tighten the bolts
B
1 A) Insert 2 wood dowels into left and right side
rails as shown.
B) With assistance of another adult, fit dowels of side
rails into headboard and footboard as shown.
Secure each corner with 2 bolts and 2 washers, using
a hex wrench. Do not over tighten the bolts.
A
headboard
left side
rail
right side
rail
footboard
center
rail
center rail
center
support
2 Attach 2 center supports to bottom of center rail
as shown. Turn each support clockwise to secure.
3 Fit brackets of center rail assembly into corresponding bracket of headboard and footboard as shown.
assembly
Press down firmly on center rail assembly to secure.
Made in Malaysia - r05 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...