LEDGE CHIFFONIER
Thank you for purchasing the Ledge Chiffonier. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
ASSEMBLY HARDWARE
6 - small
bolts
14 - wood
dowels
6 - large
bolts
2 - cam
screws
Missing hardware? Please call
800.606.6387 for replacements.
40 - drawer
screws
2 - cams
16 - small
screws
4 - adhesive
feet
WALL MOUNTING HARDWARE
2 - small
screws
2 - large
screws
2 - wall
straps
4 - wall
brackets
TOOLS REQUIRED
allen wrench (included)
phillips head screwdriver
(We recommend the use of hand tools instead power tools)
8 - large
screws
2 - plastic
anchors
COMPONENTS
1 - top panel 1 - base
2 - side panels
(1 left, 1 right)
1 - bottom
panel
1 - back panel
5 - drawer
fronts
10 - drawer side
panels (5 left, 5 right)
5 - drawer
backs
1 - crossbar
5 - drawer bottoms
Made in Malaysia - r08 Page 1 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
LEDGE CHIFFONIER
NOTE: Do not over
tighten the cam screw
B
left and right
side panels
A
1 A) Place left and right side panels onto a clean,
padded surface. Insert 6 wood dowels into left and right
side panels as shown.
B) Insert 1 cam screw into left and right side panels as
shown. Secure, but do not over tighten, cam screw with a
phillips head screwdriver.
NOTE: Do not over
tighten screws
adhesive
foot
B
A
base
bottom panel
2 A) Attach base assembly to bottom panel with 8
large screws as shown. Secure, but do not over
tighten, screws using a phillips head screwdriver.
B) Adhere 4 adhesive feet to legs as shown.
NOTE: Make sure arrows
on each cam point towards
nearest edge with holes
crossbar
3 Insert 2 wood dowels and 2 cams into crossbar as
shown. Make sure arrows on each cam point towards
nearest edge with holes.
left
side
panel
crossbar
right
side
panel
4 With the assistance of another adult, fit dowels of
crossbar into corresponding holes of left and right side
panel as shown. Using a screwdriver, turn each cam
clockwise until it securely engages each cam screw.
Made in Malaysia - r08 Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
LEDGE CHIFFONIER
left side
panel
NOTE: Do not over
tighten the bolts
NOTE: Allen wrench can be
heldat an angle to allow for
full rotation when securing
bolts
right
side
panel
5 Position base assembly as shown. With the assistance
of another adult, fit dowels of left and right side panels
into corresponding holes of bottom panel as shown.
Secure left and right side panels with 3 large bolts per
side, using an allen wrench. Do not over tighten the bolts.
top panel
NOTE: Allen wrench can be
heldat an angle to allow for
full rotation when securing
bolts
6 Fit dowels of left and right side panels into
corresponding holes of top panel as shown. Secure
left and right side panels with 3 small bolts per side
as shown, using an allen wrench.
back panel
7 Attach back panel to assembled unit with 16 small
screws as shown, using a screwdriver.
NOTE: Make sure grooves
of top drawer left side panel,
back and front are assembled
as shown
drawer
back
drawer left
side panel
drawer
front
8 Attach drawer left side panel to drawer back and
drawer front with 4 drawer screws as shown, using a
screwdriver.
Made in Malaysia - r08 Page 3 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
LEDGE CHIFFONIER
drawer right
side panel
drawer bottom
9 Fit drawer bottom into grooves of assembled drawer
as shown.
10 Attach drawer right side panel to drawer front and
drawer back with 4 drawer screws as shown. Repeat
steps 8-10 for remaining drawer assemblies.
11 Fit drawer glides of drawer assemblies into
corresponding glides of dresser as shown.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.
Made in Malaysia - r08 Page 4 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
LEDGE CHIFFONIER
SAFETY MOUNTING INSTRUCTIONS:
For added safety and stability, it is recommended that the
wall mounting hardware be installed. For safe mounting, it is
essential to use wall anchors appropriate to your wall type
(i.e. plaster, drywall, concrete, etc.). Mount to wood studs
whenever possible.
A) Attach 2 wall brackets to back of unit using 2 small
screws as shown.
B) Determine the final location of unit. Mark position on the
wall, approximately 2" below each wall bracket mounted to
the back of the unit.
C) Drill a hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller in
diameter than the anchor. Gently tap the plastic anchor
until the flange of the anchor is flush with the wall.
D) Attach wall brackets to the wall by inserting 1 large
screws through each bracket and into each plastic anchor in
the wall, secure with a screwdriver.
E) Place the unit so the wall brackets on the back edge are
aligned with the wall brackets on the wall.
F) Lace one end of the wall straps through each bracket,
and into the other end of the strap.
G) Pull the strap tightly until secure.
Wall mounting assembly is now complete.
NOTE:
If you are unsure about your wall type
or what mounting method you should
use, consult a qualified professional
or your local hardware store.
WALL
plastic
C
anchor
wall
bracket
large
D
screw
small
A
screw
Made in Malaysia - r08 Page 5 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
F
wall
strap
wall
bracket
Loading...