
LEDGE 6 DRAWER DRESSER
ASSEMBLY HARDWARE
Thank you for purchasing the Ledge 6 Drawer Dresser.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
8 - small
bolts
48 - drawer
screws
8 - large
bolts
8 - cam
24 - wood
dowels
8 - cams
screws
Missing hardware?
Please call 800.606.6387 for replacements.
24 - small
screws
5 - adhesive
feet
TOOLS REQUIRED
allen wrench (included)
phillips head screwdriver
(We recommend the use of hand tools instead power tools)
12 - large
screws
1 - top panel 1 - base
1 - bottom
6 - drawer bottoms
panel
2 - front crossbars
(1 left, 1 right)
2 - side panels
(1 left, 1 right)
1 - partition
2 - back panels
2 - back crossbars
(1 left, 1 right)
2 - top
drawer fronts
4 - bottom
drawer fronts
Made in Malaysia - r10 Page 1 of 4
2 - top
drawer backs
4 - bottom
drawer backs
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
4 - top drawer
side panels
(2 left, 2 right)
8 - bottom drawer
side panels
(4 left, 4 right)
1 - support
leg

LEDGE 6 DRAWER DRESSER
NOTE: Do not over
tighten the cam screw
partition
A
B
left and right
side panels
C
1 A) Place left and right side panels onto a clean,
padded surface. Insert 6 wood dowels into left and right
side panels as shown.
B) Insert 2 cam screws into left and right side panels as
shown. Secure, but do not over tighten, cam screw with a
phillips head screwdriver.
C) Insert 4 cams into partition as shown.
NOTE: Do not over
tighten screws
B
support leg
adhesive
foot
A
base
bottom panel
2 A) Attach base assembly to bottom panel with 12
large screws as shown. Secure, but do not over
tighten, screws using a phillips head screwdriver.
B) Attach support leg to bottom panel by turning
support leg clockwise.
C) Adhere 5 adhesive feet to legs as shown.
NOTE: Make sure arrows
on each cam point towards
nearest edge with holes
back
crossbar
front
crossbar
3 Insert 2 wood dowels and 2 cams into front and back
crossbars as shown. Make sure arrows on each cam
point towards nearest edge with holes.
left
side
panel
left front
crossbar
left back
crossbar
partition
right front
crossbar
right back
crossbar
right
side
panel
4 With the assistance of another adult, fit dowels of front
and back crossbars into corresponding holes of
left/right side panel and partition as shown. Using a
screwdriver, turn each cam clockwise until it securely
engages each cam screw.
Made in Malaysia - r10 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

LEDGE 6 DRAWER DRESSER
left side
panel
partition
right
side
panel
NOTE: Do not over
tighten the bolts
B
NOTE: Allen wrench can be heldat an
angle to allow for full rotation when
securing bolts
5 A) Position base assembly as shown. Fit dowels of left
and right side panels into corresponding holes of bottom
panel as shown. Secure left and right side panels with 3
large bolts per side, using an allen wrench. Do not over
tighten the bolts.
B) Attach partition to bottom panel with 2 large bolts as
shown.
top panel
A
B
NOTE: Allen wrench can be
heldat an angle to allow for
full rotation when securing
bolts
6 A) Fit dowels of left and right side panels into corresponding holes of top panel as shown. Secure left and
right side panels with 3 small bolts per side as shown,
using an allen wrench.
B) Secure partition to top panel with 2 small bolts as
shown.
back panel
back panel
7 Attach 2 back panels to assembled unit with 24
small screws as shown, using a screwdriver.
NOTE: Make sure grooves
of top drawer left side panel,
back and front are assembled
as shown
top drawer
back
top drawer
left side panel
top drawer
front
8 Attach top drawer left side panel to top drawer back
and top drawer front with 4 drawer screws as shown,
using a screwdriver.
Made in Malaysia - r10 Page 3 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

LEDGE 6 DRAWER DRESSER
drawer bottom
9 Fit drawer bottom into grooves of assembled
drawer as shown.
top drawer
assembly
top drawer
right side panel
10 Attach top drawer right side panel to top drawer front
and top drawer back with 4 drawer screws as shown.
Repeat steps 8-10 for remaining top and bottom drawer
assemblies.
11 Fit drawer glides of drawer assemblies into
corresponding glides of dresser as shown.
Assembly is now complete.
bottom
drawer
assemblies
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.
Made in Malaysia - r10 Page 4 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com