Crate & Barrel Ledge 4-Drawer Chest Assembly Instruction
LEDGE 4 DRAWER CHEST
Thank you for purchasing the Ledge 4 Drawer Chest.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
ASSEMBLY HARDWARE
6 - small
bolts
32 - drawer
screws
6 - large
bolts
2 - cam
screws
Missing hardware? Please call
800.606.6387 for replacements.
14 - wood
dowels
2 - cams
16 - small
screws
4 - adhesive
feet
WALL MOUNTING HARDWARE
2 - small
screws
2 - large
screws
2 - wall
straps
4 - wall
brackets
TOOLS REQUIRED
allen wrench (included)
phillips head screwdriver
(We recommend the use of hand tools instead power tools)
10 - large
screws
2 - plastic
anchors
COMPONENTS
1 - top panel 1 - base
2 - side panels
(1 left, 1 right)
2 - top drawer
side panels
(1 left, 1 right)
1 - back panel
6 - bottom drawer
side panels
(3 left, 3 right)
1 - bottom
panel
1 - top
drawer front
3 - bottom
drawer fronts
4 - drawer bottoms
1 - top
drawer back
3 - bottom
drawer backs
1 - crossbar
Made in Malaysia - r09 Page 1 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
LEDGE 4 DRAWER CHEST
NOTE: Do not over
tighten the cam screw
B
left and right
side panels
A
1 A) Place left and right side panels onto a clean,
padded surface. Insert 6 wood dowels into left and right
side panels as shown.
B) Insert 1 cam screw into left and right side panels as
shown. Secure, but do not over tighten, cam screw with a
phillips head screwdriver.
NOTE: Do not over
tighten screws
B
bottom panel
adhesive
pad
base
A
2 A) Attach base assembly to bottom panel with 10
large screws as shown. Secure, but do not over
tighten, screws using a phillips head screwdriver.
B) Adhere 4 adhesive pads to legs of base as shown.
NOTE: Make sure arrows
on each cam point towards
nearest edge with holes
crossbar
3 Insert 2 wood dowels and 2 cams into crossbar as
shown. Make sure arrows on each cam point towards
nearest edge with holes.
left
side
panel
crossbar
right
side
panel
4 With the assistance of another adult, fit dowels of
crossbar into corresponding holes of left and right side
panel as shown. Using a screwdriver, turn each cam
clockwise until it securely engages each cam screw.
Made in Malaysia - r09 Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...