Crate & Barrel Laundry Station Assembly Instruction

LAUNDRY STATION

ASSEMBLY HARDWARE

Missing hardware? Please call

800.606.6387 for replacements.

Thank you for purchasing the Laundry Station. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

10 - small
screws

14 - barrel
nuts

8 - large
screws

28 - flat
washers

TOOLS REQUIRED

allen wrench (included)

flat head screwdriver

phillips head screwdriver

(We recommended the use of hand tools instead power tools)

2 - top
crossbars

2 - wood
dowels

28 - spring
washers

4 - small
bolts

20 - bolt
covers

24 - large
bolts

2 - rod
crossbars

2 - back
crossbars

2 - outer
side frames

(1 left, 1 right)

1 - top panel

Made in China - r04 Page 1 of 3

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 - middle
crossbar

2 - glides

3 - laundry
bags

2 - inner
side frames

(1 left, 1 right)

6 - rods

LAUNDRY STATION

outer left
side frame

NOTE: Make sure

top crossbar

holes on each barrel
nut are aligned
with holes in
crossbars

top
crossbar

A

outer right
side frame

1 A) Insert 2 barrel nuts into each top crossbar. Using a flat head
screwdriver, align holes of each barrel nut with holes in crossbars.
B) Attach 2 top crossbars to outer left and right side frames with
4 large bolts, 4 spring washers and 4 flat washers per side as
shown. Using an allen wrench, make sure each bolt engages each
barrel nut. Loosely secure bolts.

NOTE: Do not over
tighten the screws

B

A

top panel

2 A) Fit 2 wood dowels into top panel as
shown.
B) With the assistance of another adult, fit dowels
of top panel into corresponding holes of outer
left and right side frames with 8 large screws
as shown. Secure, but do not over tighten, screws
using a phillips head screwdriver.

NOTE: Do not over
tighten the bolts

B

C

back crossbar

B

back crossbar

A

3 A) Insert 2 barrel nuts into each back crossbar.
B) Attach 2 back crossbars to outer left and right
side frames with 4 large bolts, 4 spring washers
and 4 flat washers per side as shown. At this point,
fully secure, but do not over tighten, all bolts using an

allen wrench.

C) Attach 16 bolt covers to all exposed bolts.

inner left
side frame

inner right
side frame

rod crossbar

4 A) Insert 2 barrel nuts into each rod crossbar.
B) Attach 2 rod crossbars to inner left and right side

frames with 4 large bolts, 4 spring washers and 4 flat
washers per side as shown. Loosely secure bolts.

Made in China - r04 Page 2 of 3

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com