Crate & Barrel Latitude Media Stand Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

LATITUDE MEDIA STAND

Thank you for purchasing the Latitude Media Stand.
This page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.

TOOLS REQUIRED

Phillips head screwdriver

COMPONENTS

1 - top panel

2 - shelves

1 - back panel

4 - drawer side
panels (2 left, 2 right)

1 - bottom panel

(has 10 pilot holes on underside)

Made in Denmark 2004

2 - drawer backs

HARDWARE

30 - wood
dowels

30 - cam screws

4 - short
machine screws

2 - drawer fronts

2 - drawer bottoms

10 - long
wood screws

4 - long machine
screws

1 - middle panel

1 - metal
base frame

4 - medium
wood screws

4 - drawer
glides

8 - short
wood screws

26 - large cams
4 - small cams

26 - cam
covers

2 - side panels

(1 left, 1 right)

4 - metal legs

2 - metal pull handles

4 - metal pull standoffs

Page 1 of 6

Customer Service 800-967-6696 | http://www.crateandbarrel.com

LATITUDE MEDIA STAND

Make sure

arrow on

drawer slide

points forward

Left Side
Panel

1 Fully extend the drawer glide. Position the first hole at
the back end of the glide over the pre-drilled hole in the left
side panel. Attach back of glide with 1 short wood screw.

Shelf
(underside)

B

Left Side
Panel

3 A. Insert 4 large cams into underside of shelf, making
sure arrows on each cam point towards the shelf edge.
B. Insert 2 dowels into inner holes of left side panel.

Made in Denmark 2004

Make sure this
arrow points
towards holes
in the shelf
edge

A

2 Retract the glide as shown. Position 1 short wood screw
over the oval hole on the external portion of the glide and
through the third hole on the inside portion of the glide.
Secure the front of the glide by fastening the short wood
screw into the pre-drilled hole.
Repeat these steps for the right side panel.

B

A

4 A. Using a screwdriver, fasten 2 cam screws into
the outer holes of the left side panel.
B. Slide shelf over cam screws and dowels.

Page 2 of 6