Crate & Barrel Larsson Black Rubbed Desk, Larsson Ivory Desk, Larsson Desk Assembly Instruction
Customer Service 800-967-6696 | http://www.crateandbarrel.com
LARSSON DESK
Thank you for purchasing the Larsson Desk. This
page
lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
to this product. As you unpack
COMPONENTS
1 - desktop
1 - back crossbar 2 - side crossbars
Made in China R03
HARDWARE
6 - cam
screws
8 - bolts 8 - spring
Missing hardware?
Please call 800.606.6387 for replacements.
6 - cams 6 - wooden
dowels
8 - washers
washers
TOOLS REQUIRED
Allen wrench (included)Phillips head screwdriver
2 - back legs 1 - front left leg 1 - front right leg
Page 1 of 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
LARSSON
DESK
Make sure arrow
points towards
edge with holes
1
Insert 2 cams into the top of each side crossbar and
back crossbar. Make sure that the arrow on each cam
points towards the end of the crossbar with 2 holes.
NOTE:
Do not over tighten
the cam screws.
B
A
x2
C
3
A. Insert 2 cam screws and 2 wood dowels into the
front right and 1 back leg. Secure each cam screw with
a phillips head screwdriver.
B. Fit 1 side crossbar onto dowels and cam screws as
shown. Secure assembly by turning each cam clockwise
with a screwdriver.
C. Loosely attach back leg to desktop with 2 bolts, 2
spring washers and 2 washers. Do not fully tighten.
Made in China R03
2
With the assistance of another adult, place desktop
upside down on a padded surface. Fit front right leg into
position as shown and loosely attach with 2 bolts, 2
spring washers and 2 washers. Do not fully tighten the
bolts.
B
A
4
A. Insert 1 cam screw and 1 dowel into the inner holes
of the back leg as shown.
B. Fit back crossbar into position and secure by turning
cam clockwise with a phillips head screwdriver.
Page 2 of 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
LARSSON
DESK
C
5
A. Position remaining back leg as shown and loosely
attach with 2 bolts, 2 spring washers and 2 washers.
Do not fully tighten bolts.
B. Insert 1 cam screw and 1 dowel into the inner holes.
C. Fit cam screw and dowel into back crossbar and
secure by turning cam clockwise with a phillips head
screwdriver.
At this point, fully tighten all 8 bolts with the allen
7
wrench. Do not over tighten bolts. With the assistance
of another adult, lift desk into an upright position.
Assembly is now complete.
Made in China R03
B
A
x4
C
B
6
A. Position front left leg as shown and loosely attach
with 2 bolts, 2 spring washers and 2 washers. Do not
fully tighten bolts.
B. Insert 1 cam screw and 1 dowel into the inner holes
of the front left and back legs.
C. Fit remaining side crossbar onto cam screws and
dowels and secure by turning cams clockwise with a
phillips head screwdriver.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
Page 3 of 3
A
Loading...