Crate & Barrel Landon 72 Bookcase Assembly Instruction

LANDON TALL BOOKCASE
ASSEMBLY HARDWARE
Thank you for purchasing the Landon Tall Bookcase. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
24 - bolts 39 - back
24 - wood dowels
Missing hardware? Please call 800.606.6387 for replacements.
screws
WALL MOUNTING HARDWARE
1 - wall strap 1 - small
screw
1 - large screw
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
1 - plastic anchor
1 - top panel
1 - bottom panel
left and right side fames
2 - side frames
(1 left, 1 right)
1 Insert 12 wood dowels into left and right side frames as shown.
4 - shelves
Made in China - r03 Page 1 of 3
1 - back panel
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
LANDON TALL BOOKCASE
NOTE: Do not over tighten the bolts
A
right side frame
shelf
shelf
shelf
shelf
bottom panel
NOTE: Make sure front edge of bottom panel/shelves are positioned as shown during assembly
2 A) Fit dowels of right side frame into corresponding holes of 4 shelves and 1 bottom
panel as shown. Secure each panel with 2 bolts, using a phillips head screwdriver. Do
not over tighten the bolts. B) Fit dowels of left side frame into corresponding holes of 4 shelves and 1 bottom
panel as shown. Secure each panel with 2 bolts.
B
left side frame
top panel
3 With assistance of another adult, fit dowels of assembly into corresponding holes of top panel. Secure top panel with 4 bolts as shown.
NOTE: Do not over tighten the screws
back panel
4 Attach back panel to assembly with 39 back screws, using a screwdriver. Do not over tighten the screws. With assistance of another adult, position unit upright. Assembly is now complete.
Made in China - r03 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
LANDON TALL BOOKCASE
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
OPTIONAL SAFETY MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.
A) Determine the final location of unit. Mark position on the wall, approximately 2" below the top of unit as shown. B) Drill a pilot hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the plastic anchor. Gently tap the plastic anchor until the flange of the plastic anchor is flush with the wall. C) Insert large screw through end of wall strap and through the plastic anchor in the wall as shown. D) Insert small screw through end wall strap and into the top back of unit as shown.
Mounting assembly is now complete.
NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.
SIDE VIEW DETAIL
wall strap
(NOTE: Insert screws 3/4"-1" from the edge of the strap)
small screw
large screw
WALL
plastic anchor
Made in China - r03 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...