KIPLING WINE CABINET
HARDWARE
Thank you for purchasing the Kipling Wine Cabinet.
This page
Please take the time to identify the hardware as well as
the individual components
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
lists all the contents included in the box.
to this product. As you
COMPONENTS
8 - wood
dowels
Missing hardware?
Please call 800.606.6387 for replacements.
13 - bolts
TOOLS REQUIRED
phillips head screwdriver
(included)
1 - top panel
(removable tray
attached)
2- side panels
(1 left, 1 right)
1 - tray
Made in Indonesia - r10 Page 1 of 3
2 - bottle racks
(1 top, 1 middle)
1 - back panel 1 - drawer
1 - bottom
frame
Customer Service 800.967.6696 | www.crateandbarrel.com
1 - bottom bottle
rack
1 - wine glass
rack
4 - feet
KIPLING WINE CABINET
wine glass
rack
top & middle
bottle rack
bottom
bottle rack
B
right side
panel
A
1 Insert 4 wood dowels into left and right side panels
as shown.
2 A) Fit dowels of right side panel into corresponding
holes of top and middle rack as shown.
B) Attach wine glass rack and bottom bottle rack into
right side panel with 2 bolts per rack as shown. Secure
bolts with phillips head screwdriver.
left side
panel
A
B
3 Fit back panel into groove of assembled unit as
shown. Press panel firmly to secure.
Made in Indonesia - r10 Page 2 of 3
Customer Service 800.967.6696 | www.crateandbarrel.com
4 A) Fit dowels of left side panel into corresponding
holes of top and middle rack as shown.
B) Attach wine glass rack and bottom bottle rack into
left side panel with 2 bolts per rack as shown. Secure
bolts with phillips head screwdriver.
KIPLING WINE CABINET
bottom
frame
top
panel
B
A
tray
5 Attach bottom frame and 4 legs to assembled unit as
shown. Insert threaded bolt of each leg into bottom
panel and assembly as shown. Turn each leg clockwise
to secure.
6 A) Remove tray from top panel. Detach pre-assembled
bolt from tray as shown. Set bolt aside until further
instructions.
B) Carefully position unit upright. Fit top panel to
assembled unit with 4 bolts as shown. Secure bolts with
a screwdriver.
A B
unlocked
position
locked
position
B
8 A) Locate pin on wine glass rack of assembled unit as
shown. Turn pin 90º clockwise (as shown) or counterclockwise to unlock.
B) Insert grooves of drawer into assembled unit as
7 Insert tray into assembled unit as shown. Turn bolt
from step 6A clockwise to reattach to tray.
shown. Turn pin back to the upright position to lock as
shown. Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Made in Indonesia - r10 Page 3 of 3
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...