Crate & Barrel Kipling Buffet with Hutch Top Assembly Instruction

KIPLING BUFFET AND HUTCH TOP

Thank you for purchasing the Kipling Buffet and Hutch
Top. This page

Please take the time to identify the hardware as well as the
individual components
prepare for assembly, place the contents on a carpeted or
padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

lists all the contents included in the box.

to this product. As you unpack and

ASSEMBLY HARDWARE
FOR BUFFET

2 - small
screws

2 - large
screws

2 - wall
straps

Missing hardware?
Please call 800.606.6387
for replacements.

2 - plastic
anchors

4 - wall
fittings

ASSEMBLY HARDWARE FOR HUTCH

6 - small
screws

2 - large
screws

2 - wall
straps

2 - plastic
anchors

4 - wall
fittings

TOOLS REQUIRED

phillips head screwdriver

COMPONENTS

1 - hutch 1 - buffet

2 - connecting
plates

WALL MOUNTING ASSEMBLY WITHOUT HUTCH

For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is
essential to use wall anchors appropriate to your wall type (i.e.
plaster, drywall, concrete, etc.). Mount to wood studs whenever
possible.
A) Attach 1 wall fitting to assembled unit as shown, using 1
small screw.
B) Determine the final location of unit. Mark position on the wall,
approximately 2" below the bracket mounted to the back of the
unit.
C) Drill a pilot hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller in diameter
than the anchor. Gently tap the plastic anchor until the flange of
the anchor is flush with the wall.
D) Attach the wall fitting to the wall by inserting 1 large screw
through the wall fitting and into the plastic anchor in the wall.
E) Place the unit so the wall fitting on the back edge is aligned
with the wall fitting on wall.
F) Lace one end of the wall strap through both fittings, and into
the other end of the strap.
G) Pull the strap tightly until secure.
H) Repeat steps A-G for remaining wall fitting and wall strap.

Wall mounting assembly is now complete.

F

wall strap

C

plastic
anchor

D

large screw

A

wall fitting &
small screw

NOTE:
If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware store.

Made in Indonesia - r08 Page 1 of 2

Customer Service 800.967.6696 | www.crateandbarrel.com

KIPLING BUFFET AND HUTCH TOP

ASSEMBLY WITH HUTCH

hutch

buffet

1 With assistance of another adult, carefully place hutch
onto buffet as shown. Attach 2 connecting brackets to
back of assembled unit with 3 small screws per bracket
as shown. Secure screws with a phillips head screw-

driver.

WALL MOUNTING ASSEMBLY WITH HUTCH

For added safety and stability, it is recommended that the
wall mounting hardware be installed. For safe mounting, it
is essential to use wall anchors appropriate to your wall type
(i.e. plaster, drywall, concrete, etc.). Mount to wood studs
whenever possible.
A) Attach 2 wall fittings to top of hutch as shown, using 1
small screw per bracket.
B) Determine the final location of hutch. Mark position on
the wall, approximately 2" below the bracket mounted to the
back of the hutch.
C) Drill a hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller in
diameter than the anchor. Gently tap the plastic anchor
until the flange of the anchor is flush with the wall.
D) Attach the wall fitting to the wall by inserting 1 large
screw through the wall fitting and into the plastic anchor in
the wall.
E) Place the unit so the wall fitting on the back edge is
aligned with the wall fitting on wall.
F) Lace one end of the wall strap through both fittings, and
into the other end of the strap.
G) Pull the strap tightly until secure. Repeat steps for
remaining fitting and wall strap.
Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture
wax or polish as the wood is finished with a
protective clear lacquer.

NOTE:
If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware
store.

F

wall strap

A

wall fitting &
small screw

D

large
screw

plastic

C

anchor

Made in Indonesia - r08 Page 2 of 2

Customer Service 800.967.6696 | www.crateandbarrel.com