Crate & Barrel Kingston Side Table Assembly Instruction

KINGSTON SIDE TABLE

HARDWARE

Thank you for purchasing the Kingston Side Table.
This page
Please take the time to identify the hardware as well as
the individual components
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.

Note: 2 people are required to safely assemble this product.

lists all the contents included in the box.

to this product. As you

COMPONENTS

2 - pull
screws

4 - cam
screws

Missing hardware?
Please call 800.606.6387 for replacements.

8 - bolts 8 - spring

washers

4 - cams 1 - pulls

TOOLS REQUIRED

phillips head screwdriver

8 - flat
washers

1 - tabletop

(pre-assembled
drawer)

2 - leg
frames

1 - shelf

Made in China - r04 Page 1 of 3

Customer Service 800.967.6696 | www.crateandbarrel.com

1 Remove drawer from tabletop as shown. Set drawer
aside until further instructions.

KINGSTON SIDE TABLE

A

Make sure arrows on
each cam points towards
nearest edge with holes.

B

2 A) Insert 2 cam screws into left and right side frames
as shown. Secure with a phillips head screwdriver.
B) Insert 4 cams into shelf as shown. Make sure arrows
on each cam points towards nearest edge with holes.

3 With the assistance of another adult, carefully place
tabletop upside down onto a clean, padded surface.
Attach left side frame into tabletop with 4 bolts, 4 spring
washers, and 4 flat washers as shown. Secure with a
screwdriver.

B

A

A

B

4 Fit dowels of shelf into corresponding holes of
assembled unit as shown. With a screwdriver, turn each
cam clockwise until it securely engages each cam screw.

Made in China - r04 Page 2 of 3

Customer Service 800.967.6696 | www.crateandbarrel.com

5 A) Attach right side frame to assembled unit with 4
bolts, 4 spring washers, and 4 flat washers as shown.
B) With a screwdriver, turn each cam on shelf clockwise
until it securely engages each cam screw.