KINGSTON MEDIA TOWER
ASSEMBLY HARDWARE
Thank you for purchasing the Kingston Media Tower.
This page
Please take the time to identify the hardware as well as
the individual components
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
lists all the contents included in the box.
to this product. As you
COMPONENTS
1 - pull
16 - large
bolts
2 - small
bolts
12 - shelf
pins
6 - cam
screws
16 - flat
washers
6 - cams 20 - small
screws
16 - spring
washers
WALL MOUNTING HARDWARE
4 - medium
screws
Missing hardware? Please call 800.606.6387 for replacements.
4 - large
screws
2 - wall
straps
4 - wall
brackets
4 - plastic
anchors
TOOLS REQUIRED
phillips head screwdriver
1 - top panel
1 - -fixed shelf
2 - side panels
(1 left, 1 right)
1 - bottom
panel
Made in China - r05 Page 1 of 4
1 - front frame 1 - back panel
2 - top adjustable
shelves
1 - bottom
adjustable
shelf
KINGSTON
MEDIA TOWER
B
flat washer
spring washer
large bolt
right/left
A
side panels
bottom
B
panel
NOTE: Make sure
arrows on each
cam points towards
nearest edge with
holes.
1 A) Insert 2 cam screws into right/left side panels as
shown. Secure cam screws with a phillips head
screwdriver.
B) Insert 6 cams into bottom panel as shown. Make sure
arrows on each cam points toward nearest edge with holes.
A
fixed
shelf
B
A
bottom
panel
2 A) Fit dowels of fixed shelf and bottom panel into
corresponding holes of right/left side panel as shown.
Secure all cams with a screwdriver. Make sure cams securely
engage each cam screw.
B) Secure fixed shelf with 4 large bolts, 4 spring washers,
and 4 flat washers as shown. Fasten bolts with a
screwdriver.
front
frame
3 Insert 2 cam screws into front frame as shown.
B
B
A
4 A) Fit dowels of assembled unit into corresponding holes
of front frame as shown. Secure 2 cams on bottom panel
with a screwdriver.
B) Secure front frame with 6 large bolts, 6 spring
washers, and 6 flat washers as shown.
front
frame
Made in China - r05 Page 2 of 4
KINGSTON
top
panel
MEDIA TOWER
back
panel
5 Fit dowels of assembled unit with corresponding holes
of top panel as shown. Secure top panel with 6 large
bolts, 6 spring washers, and 6 flat washers as shown.
A
A
B
top
adjustable
shelves
C
bottom
adjustable
shelf
C
6 Attach back panel to assembled unit with 20 small
screws as shown. Secure screws with screwdriver.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.
7 A) Insert 12 shelf pins at desired shelf heights as shown.
B) Place top/bottom adjustable shelves into assembled
unit as shown. Make sure each shelf is securely supported
by shelf pins.
C) Attach pull to door with 2 small bolts. Secure bolts with
screwdriver.
Assembly is now complete.
Made in China - r05 Page 3 of 4
KINGSTON
wall
F
strap
wall
bracket
MEDIA TOWER
plastic
C
anchor
wall
bracket
large
D
screw
medium
A
screw
7 Safety Mounting Instructions
For added safety and stability, it is recommended that the
wall mounting hardware be installed. For safe mounting, it
is essential to use wall anchors appropriate to your wall type
(i.e. plaster, drywall, concrete, etc.). Mount to wood studs
whenever possible.
A) Attach wall bracket to top of bookcase using 2 medium
screws as shown.
B) Determine the final location of bookcase. Mark position
on the wall, approximately 2" below the wall bracket
mounted to the back of the cabinet.
C) Drill a hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller in
diameter than the anchor. Gently tap the plastic anchor
until the flange of the anchor is flush with the wall.
D) Attach wall bracket to the wall by inserting 2 large
screws, and into the plastic anchor in the wall.
E) Place the unit so the wall brackets on the back edge are
aligned with the wall brackets on the wall.
F) Lace one end of the wall strap through both brackets,
and into the other end of the strap.
G) Pull the strap tightly until secure.
H) Repeat steps A-G for remaining wall brackets and wall
straps.
NOTE:
If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware
store.
Made in China - r05 Page 4 of 4
Loading...