Crate & Barrel Kingston Console Table Assembly Instruction

KINGSTON CONSOLE TABLE

HARDWARE

Thank you for purchasing the Kingston Console Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

4 - pull
screws

8 - flat
washers

Missing hardware? Please call

800.606.6387 for replacements.

2 - pulls

TOOLS REQUIRED

Phillips head screwdriver

8 - bolts 8 - spring

washers

4 - cam
screws

4 - cams

1 - tabletop
(2 drawers pre-installed)

1 - left
side frame

1 - right
side frame

Made in China - r05 Page 1 of 3

Customer Service 800.967.6696 | www.crateandbarrel.com

1 - shelf

KINGSTON CONSOLE TABLE

right and left
side frames

A

shelf

B

Make sure arrows
on each cam points
towards nearest edge
with holes.

1 A) Insert 2 cam screws into left and right side frames
as shown. Secure, but do not over tighten screws with a
phillips head screwdriver.
B) Insert 4 cams into shelf as shown. Make sure arrows
on each cam points towards nearest edge with holes.

2 Carefully remove 2 drawers from tabletop. Set drawers
aside until further instructions.

3 Place tabletop upside down onto a clean padded
surface as shown. Attach left side frame to tabletop with
4 bolts, 4 spring washers, and 4 flat washers. Secure
bolts with a screwdriver.

Made in China - r05 Page 2 of 3

Customer Service 800.967.6696 | www.crateandbarrel.com

4 Fit dowels of shelf into corresponding holes of left side
frame as shown. Using a screwdriver, turn each cam
clockwise until it securely engages each cam screw.