Crate & Barrel Kingston Bunching Table Assembly Instruction
KINGSTON BUNCHING TABLE
HARDWARE
Thank you for purchasing the Kingston Bunching
Table. This page
box. Please take the time to identify the hardware as
well as the individual components
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.
Note: 2 people are required to safely assemble this product.
lists all the contents included in the
to this product. As
COMPONENTS
13 - bolts 13 - spring
washers
4 - cams 4 - cam
screws
Missing hardware?
Please call 800.606.6387 for replacements.
13 - flat
washers
TOOLS REQUIRED
phillips head screwdriver
Make sure arrow
on each cam points
toward nearest edge
with holes
A
1 - front
frame
2 - side panels
(1 left, 1 right)
B
1 - back
panel
1 A) Insert 4 cams into bottom panel as shown.
Make sure arrow on each cam points towards nearest
edge with holes.
B) Insert 2 cams screws into left and right side
1 - bottom
panel
Made in China - r06 Page 1 of 2
1 - top
panel
Customer Service 800.967.6696 | www.crateandbarrel.com
panels. Secure cam screws, but do not over tighten
with a phillips head screwdriver.
KINGSTON BUNCHING TABLE
right side
panel
front
frame
B
B
A
bottom panel
left side
panel
2 Fit cam screws of left and right side panels and
dowels of bottom panel into corresponding holes as
shown. Using a screwdriver, turn each cam clockwise
until it securely engages each cam screw.
back
panel
3 A) Carefully place back panel onto a clean, padded
surface as shown. Fit dowels of assembled unit into
corresponding holes of back panel as shown. Using a
screwdriver, secure assembly with 4 bolts, 4 spring
washers, and 4 flat washers as shown.
B) Fit holes of front frame onto dowels of assembled unit
as shown. Using a screwdriver, secure assembly with 4
bolts, 4 spring washers, and 4 flat washers as shown.
A
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
VIEW FROM
BELOW
4 Fit holes of top panel onto dowels of assembled unit
as shown. Secure top panel with 5 bolts, 5 spring
washers, and 5 flat washers.
Assembly is now complete.
Made in China - r06 Page 2 of 2
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...