Crate & Barrel Kingston 65 Media Console and Towers Assembly Instruction
KINGSTON 65” MEDIA STAND
HARDWARE
Thank you for purchasing the Kingston 65” Media
Stand. This page lists all the contents included in the
box. Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
BOX 1
7 - cam
screws
20 - spring
washers
3 - pulls
7 - cams
20 - flat
washers
16 - shelf
pins
TOOLS REQUIRED
phillips head screwdriver
COMPONENTS
BOX 1
6 - small
bolts
20 - small
screws
Missing hardware? Please call
800.606.6387 for replacements.
20 - large
bolts
4 - large
screws
1 - center
support
1 - front
frame
1 - bottom
panel
Made in China - r02 Page 1 of 3
Customer Service 800.967.6696 | www.crateandbarrel.com
1 - top
panel
1 - back
panel
2 - side panels
(1 left, 1 right)
2 - small
adjustable shelves
2 - partitions
(1 left, 1 right)
2 - large
adjustable shelves
KINGSTON 65” MEDIA STAND
right
partition
left
partition
bottom
panel
1 Fit pre-assembled dowels of left/right partitions
into corresponding holes of bottom panel as shown.
Secure bottom panel with 4 large screws as shown,
using a phillips head screwdriver.
A
B
left side
panel
2 A) Insert 2 cam screws into left/right side panels as shown.
Secure cam screws with a screwdriver.
B) Insert 4 cams into bottom panel as shown. Make sure arrows
on each cam points toward nearest edge with holes.
C) Fit dowels of bottom panel into corresponding holes of
left/right side panels as shown. With a screwdriver, turn cams
clockwise until it securely engages each cam screw.
C
NOTE: Make sure arrows
on each cam points toward
nearest edge with holes.
right side
panel
C
B
center
support
B
C
B
A
B
A
A
front
frame
3 A) Insert 3 cam screws into front frame as shown.
B) Insert 3 cams into bottom panel of assembled unit as shown.
C) With the assistance of another adult, fit dowels of assembled
unit into corresponding holes of front frame as shown. Secure
all cams. Secure front frame with 4 large bolts, 4 spring
washers, and 4 flat washers as shown, using a screwdriver.
Made in China - r03 Page 2 of 3
A
top
panel
4 A) With the assistance of another adult, position assembly as
shown. Fit dowels of assembled unit into corresponding holes
of top panel as shown. Secure top panel with 12 large bolts,
12 spring washers, and 12 flat washers as shown.
B) Attach 2 center supports to assembled unit as shown with 2
large bolts, 2 spring washers, and 2 flat washers per support
as shown.
Customer Service 800.967.6696 | www.crateandbarrel.com
KINGSTON 65” MEDIA STAND
back
panel
5 With the assistance of another adult, position unit
upright. Attach back panel with 20 small screws.
Secure screws with a screwdriver.
C
A
A
B
small
C
6 A) Insert 16 shelf pins at desired shelf heights as shown.
B) Place 2 small and large adjustable shelves into assembled
unit. Make sure each shelf is securely supported by shelf pins.
C) Attach 1 pull to each door with 2 small bolts as shown.
Secure bolts with a screwdriver.
large
adjustable
shelf
adjustable
shelves
large
adjustable
shelf
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Made in China - r02 Page 3 of 3
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...