Crate & Barrel Kenton Cube with Shelf Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

KENTON CUBE WITH SHELF

Thank you for purchasing the Kenton Cube with
Shelf. This page lists all the contents included in the

box. Please take time to identify the hardware as
well as the individual components of this product. As
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect
them from damage.

TOOLS REQUIRED

Phillips head screwdriver

A

x 2

B

Make sure
arrow on
each cam
points towards
edge with dowels

x 2

1 A. Insert 4 wood dowels into the inner holes on the
edges of the 2 side panels.
B. Insert 4 cams into the large holes in each side panel.
Make sure arrow on each cam points out towards edge
with dowels.

Made in China - r04

HARDWARE

8 - cams

8 - cam covers

8 - cam
screws

Missing hardware? Please call

800.606.6387 for replacements.

8 - wood
dowels

4 - shelf pins

COMPONENTS

2 - side panels
(left labeled L, right
labeled R)

2 - end panels
(1 labeled top,
1 labeled bottom)

1 - shelf

1 - back panel

x 2

2 Insert 4 cam screws into each outer hole of the 2
end panels as shown. Secure each screw with a phillips
head screwdriver, but do not over tighten.

Page 1 of 2

Customer Service 800-967-6696 | http://www.crateandbarrel.com

KENTON CUBE WITH SHELF

B

A

3 A. Place side panels into position as shown, making
sure slot on each panel lines up with slot on bottom panel.
Align dowels and cam screws and firmly press into position.
B. Slide back panel into the corresponding slot in the
bottom & side panels.

5 Repeat Steps 3 and 4 for attachment of the top panel.
Be sure that back panel is seated in the slot at the back
of the top panel before securing the 4 cams.

Made in China - r04

Cam in
unlocked
position

4 Using a phillips head screwdriver, turn each cam at the
base of the side panels clockwise until each cam tightly
engages the cam screw.

Cam in
locked
position

A

B

6 A. Insert 4 shelf pins at desired shelf height. Fit
shelf into assembly, making sure the slots on underside

of shelf are firmly seated on the shelf pins.
B. Conceal all exposed cams with cam covers.
Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.

Page 2 of 2