Crate & Barrel Isaac Bed Assembly Instruction
ISAAC FULL, QUEEN OR KING BED
HARDWARE
Thank you for purchasing the Isaac Full, Queen or King
Bed. This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
18 - small
bolts
Missing hardware?
Please call 800.606.6387 for replacements.
4 - large
bolts
TOOLS REQUIRED
allen wrench (included)
(We recommend the use of hand tools instead of power tools)
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.
1 - headboard
back
1 - footboard
Made in China - r04 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - headboard
front
1 - slat
assembly
2 - side rails
(1 right, 1 left)
1 - support leg
1 - center
support rail
ISAAC FULL, QUEEN OR KING BED
NOTE: Do not over
tighten the bolts
headboard
back
headboard
front
1 Remove plastic cover from headboard. Fit headboard
front into heabdoard back. With the assistance of another
adult, place headboard front and back upside down onto
a clean, padded surface as shown. Secure headboard
back to headboard front with 10 small bolts, using an
allen wrench as shown. Do not over tighten the bolts.
headboard
assembly
left side
rail
B
right side
foot rail
rail
A
2 A) Fit brackets of foot rail into left and right side rails as
shown. Secure foot rail to left and right side rails with 2
small bolts per side as shown.
B) Attach left and right side rails to headboard assembly
with 2 large bolts per side as shown, using an allen wrench.
A
support
leg
center
support
rail
A
support
leg
B
3 A) Attach support leg to center support rail with 4 small
bolts as shown, using an allen wrench.
B) Fit center support rail into brackets of headboard and
footboard as shown. Push down firmly to make sure center
support rail is securely attached.
NOTE: Make sure straps of
slat assembly face down
slat
assembly
4 With assistance of another adult, carefully align slat
assembly with pre-installed rail on each side rail.
Assembly is now complete.
Made in China - r04 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...