Crate & Barrel Infinity Aqua Chair, Infinity Dark Stain Chair, Infinity Kiwi Chair, Infinity Pomegranate Chair, Infinity Natural Chair Assembly Instruction
...
Customer Service 800-967-6696 | http://www.crateandbarrel.com
INFINITY CHAIR
Thank you for purchasing the Infinity Chair. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.
COMPONENTS
1 - seat
1 - lower leg
1 - upper leg
Made in Taiwan
HARDWARE
5 - split washers
1 - small
screw
4 - leg mounts
Missing hardware? Please call 800.606.6387 for replacements.
4 - large
screws
4 - feet
4 - leg supports 4 - mounting plates
TOOLS REQUIRED
Allen wrench (included)
Wide side
x 4
1 Slide 2 leg supports onto each leg. Make sure wide side
of support faces up as illustrated.
faces up
Page 1 of 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
INFINITY CHAIR
Small hole
faces up
A
x 4
Align these
holes
C
2 A. Fit leg mount onto the leg and slide past the hole in the leg. Make sure the small hole in the leg mount faces up.
B. Place the mounting plate onto the leg as shown, aligning hole in plate with the hole in the leg.
C. Slide the leg mount over the mounting plate as shown, aligning hole in leg mount with hole in the mounting plate and leg.
Note: Arrow on
leg points
towards
front of seat
Note: Arrow on
leg points
towards
front of seat
Arrow label
faces forward
3 Loosely attach upper leg to seat bottom using 2 long
screws and 2 split washers. Do not fully tighten.Make
sure arrow on leg points towards the front of the seat.
Made in Taiwan
4 Loosely attach lower leg to seat bottom with 2 long
screws and 2 split washers. Do not fully tighten. Make sure
arrow on leg points towards the front of the seat.
B
Page 2 of 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
INFINITY CHAIR
x 5
5 Secure leg assembly with 1 short screw and 1 split
washer. Fully tighten all 5 screws with allen wrench
provided.
7 Slide all 4 leg supports towards the center as far
as possible, until they can no longer be moved.
Assembly is now complete.
Made in Taiwan
IMPORTANT:
After tightening all screws,
slide all 4 leg supports
towards the center until they
can no longer be moved.
6 Insert 4 feet into the legs. Gently tap with a hammer if
necessary.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Page 3 of 3
Loading...