Crate & Barrel Infinity 24 Dark Stain Barstool, Infinity 24 Natural Barstool, Infinity 30 Dark Stain Barstool Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

INFINITY 24" & 30" BARSTOOL

Thank you for purchasing the Infinity Barstool. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

COMPONENTS

1 - seat

1 - footrest

1 - lower leg

1 - upper leg

Made in Taiwan

HARDWARE

2 - 5/8"L
screw

5 - split
washers

Missing hardware? Please call 800.606.6387 for replacements.

1 - 3/4"L
screw

4 - leg
mounts

4 - 1-3/8"L
screws

4 - feet

2 - 1-1/2"L
screws

2 - footrest
caps

TOOLS REQUIRED

Allen wrench (included)

Circular labels

Note: Arrow on

leg points

towards

front of seat

1 Loosely insert two 1-3/8"L screws and two split washers
through holes in upper leg, then through two leg mounts and
into seat. Important: Make sure arrow on leg points toward
seat front, and leg is fastened into holes adjacent to circular
labels. Do not fully tighten.

indicate which holes
receive upper leg

Page 1 of 2

Customer Service 800-967-6696 | http://www.crateandbarrel.com

INFINITY 24" & 30" BARSTOOL

B

A

Note: Arrows on

legs point

towards

front of seat

2 A. Loosely insert two 1-3/8"L screws and two split
washers through lower leg, through 2 leg mounts and into
seat. Do not fully tighten.
B. Loosely secure legs at center with one 3/4"L screw &
one split washer. Do not fully tighten.

4 Make any necessary adjustments to align the seat and
the leg frame. Using the allen wrench, fully tighten all 9
screws on the footrest and underside of the seat.

Made in Taiwan

x 9

A

3 A. Fit two footrest caps onto ends of footrest.
B. Align holes in footrest with corresponding holes in the
legs. Loosely attach front of footrest with two 5/8"L screws
and the back with two 1-1/2"L screws. Do not fully tighten.

5 Insert 4 feet into the holes on the bottom of the
legs. Assembly is now complete.

B

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.

Page 2 of 2