HUXLEY SMALL SIDEBOARD
ASSEMBLY HARDWARE
Thank you for purchasing the Huxley Small Sideboard.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
12 - wood
dowels
2 - medium
bolts
19 - large
screws
4 - hinges
24 - medium
screws
8 - shelf
pins
8 - small
screws
2 - magnets
10 - large
bolts
4 - magnet
screws
2 - small
bolts
4 - pulls
WALL MOUNTING HARDWARE
1 - wall strap 1 - small
screw
Missing hardware? Please call 800.606.6387 for replacements.
1 - large
screw
1 - plastic
anchor
TOOLS REQUIRED
(We recommend the use of hand tools instead of power tools)
phillips head screwdriver
1 - top
panel
2 - doors
(1 left, 1 right)
2 - adjustable
shelves
2 - side panels
(1 left, 1 right)
1 - bottom
panel
2 - drawer fronts
(1 left, 1 right)
1 - partition
Made in China - r11 Page 1 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 - drawer backs
4 - drawer sides
2 - drawer bottoms
1 - back panel
HUXLEY SMALL SIDEBOARD
B
partition
left and right
A
side panels
bottom panel
C
1 A) Insert 2 wood dowels into left and right side panels
as shown.
B) Insert 4 wood dowels into partition as shown.
C) Insert 4 wood dowels into bottom panel as shown.
NOTE: Make sure front
edge of bottom panel is
positioned as shown
bottom panel
NOTE: Do not over
tighten the bolts
right side
panel
left side
panel
2 With the assistance of another adult, fit dowels of
bottom panel into corresponding holes of left and right
side panels as shown. Secure bottom panel to left and
right side panels with 4 large bolts as shown, using a
phillips head screwdriver. Do not over tighten the bolts.
partition
3 With the assistance of another adult, position
assembled unit on back, as shown. Fit dowels of
partition into corresponding holes of bottom panel.
Secure partition to bottom panel with 3 large
screws, using a phillips head screwdriver. Do not
over tighten the screws.
top
panel
NOTE: Do not over
tighten the bolts
4 With the assistance of another adult, position assembled
unit upright. Fit dowels of left/right side panels and parti-
tion into corresponding holes of top panel as shown. Secure
top panel with 6 large bolts as shown, using screwdriver.
Made in China - r11 Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
HUXLEY SMALL SIDEBOARD
NOTE: Do not over
tighten the screws
back panel
5 Attach back panel to assembled unit with 24 medium
screws as shown. Secure, but do not over tighten the
screws, using a screwdriver.
B
drawer
side
drawer
front
A
drawer
bottom
drawer
back
drawer
side
6 A) Slide drawer bottom into corresponding grooves of
drawer front and back as shown.
B) Attach drawer sides to assembled unit with 4 large
screws per side, using a screwdriver.
Repeat steps for remaining drawer assembly.
A
shelf pin
A
adjustable
B
C
7 A) Insert 8 shelf pins at desired shelf heights. Press
shelf pins firmly to secure.
B) Place 2 adjustable shelves onto shelf pins. Make sure
shelves are securely supported by each shelf pin.
C) Attach 2 magnets to bottom panel as shown. Secure
each magnet with 2 magnet screws, using a screwdriver.
shelf
left door
right door
8 Attach 2 door hinges to left and right doors with 2 small
screws per hinge as shown, using a screwdriver.
Made in China - r11 Page 3 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
HUXLEY SMALL SIDEBOARD
A
pull
left and right
B
doors
drawer
assemblies
9 A) Attach 1 pull to each drawer assembly with 1
medium bolt as shown.
B) Attach 1 pull to each door with 1 small bolt as shown.
NOTE: If doors are not
aligned, refer to the Hinge
Adjustment diagram at the
end of these instructions
left door
front
10 Insert drawer assemblies into assembled unit as
shown. Push drawers back until you hear a click.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do
not use abrasive cleaners. Do not use furniture wax
or polish as the wood is finished with a protective
pre-installed
screw
right door
front
11 Attach 2 hinges of left and right door fronts to
corresponding 2 mounting plates of left and right side
panels as shown. Secure hinges with pre-installed
screw using a screwdriver.
Assembly is now complete.
Made in China - r11 Page 4 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
clear lacquer.
HUXLEY
SMALL SIDEBOARD
OPTIONAL SAFETY MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is
essential to use wall anchors appropriate to your wall type (i.e.
plaster, drywall, concrete, etc.). Mount to wood studs
whenever possible.
A) Determine the final location of unit. Mark position on the wall,
approximately 2Ó below the top of the unit as shown.
B) Drill a pilot hole in the wall stud. If a wall stud is not available,
drill a hole in the wall that is slightly smaller in diameter than the
plastic anchor. Gently tap the plastic anchor until the flange of
the plastic anchor is flush with the wall.
C) Insert 1 large screw through end of wall strap and through
plastic anchor in the wall as shown.
D) Insert small screw through end of wall strap and into back of
unit as shown.
NOTE: Insert screws 3/4"-1"
from the edge of the strap
wall
strap
large
screw
small
screw
plastic
anchor
WALL
Mounting assembly is now complete.
HINGE ADJUSTMENT
If the doors do not appear square or aligned,
loosen or tighten the appropriate screws on
each case hinge as illustrated.
1)
Side to side adjustment:
Loosen screw A, adjust gap
with screw B and re-tighten
screw A.
1
2) Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A.
2
A
NOTE: If you are unsure about your wall
type or what mounting method you should
use, consult a qualified professional or your
local hardware store.
A
B
Made in China - r11 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 5 of 5
Loading...