Crate & Barrel Huxley Extension Dining Table Assembly Instruction

HUXLEY EXTENSION DINING TABLE

HARDWARE

Thank you for purchasing the Huxley Extension Dining
Table. This page lists all the contents included in the

box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.

Note: 2 people are required to safely assemble this product.

flat
washer

spring
washer

bolt

leg

8 - bolts 8 - flat

washers

Missing hardware? Please call 800.606.6387 for replacements.

8 - spring
washers

TOOLS REQUIRED

allen wrench (included)

COMPONENTS

1 - tabletop 1 - leaf

1 With the assistance of another adult, place
tabletop face down onto a clean, padded surface.
Attach each leg to tabletop with 2 bolts, 2 spring
washers and 2 flat washers as shown. Fully
tighten all bolts with an allen wrench. Position
unit upright.
Assembly is now complete.

4 - legs

tabletop

Made in Vietnam - r05 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

HUXLEY EXTENSION DINING TABLE

EXTENSION LEAF INSTALLATION

A

2 A) Locate the 2 metal clasps on the underside of the tabletop. Unlatch each clasp to unlock tabletop as shown.
B) With the assistance of another adult, pull 2 tabletop sections apart. Place leaf into position, aligning metal pins
on leaf with matching locator holes. Push both tabletops towards the center.

B

EXTENSION LEAF STORAGE

4 Remove leaf by unlocking clasps. With the tabletop
fully extended, turn leaf 90º, fold apron down, and place
upside down on storage slats. Slowly close tabletop
sections ensuring that the leaf remains stable and re-latch the
2 locking clasps. Extension leaf storage is now complete.

CLEANING AND CARE

3 Re-latch 4 clasps on underside of tabletop to the
leaf. Installation of the leaf is now complete.

Made in Vietnam - r05 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Clean surfaces with a dry or damp soft cloth. Do not use abrasive
cleaners. Do not use furniture wax or polish as the wood is
finished with a protective clear lacquer.