Crate & Barrel Haworth Eddy Adjustable Height Desk Assembly Instruction

Made in China - r01 Page 1 of 3
Haworth Eddy Adjustable Height Desk
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Thank you for purchasing the Haworth ® Eddy ™ Adjustable Height Desk. This page lists all the contents
included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
TOOLS REQUIRED
HARDWARE
8 - countersunk bolts (pre ­attached to top)
8 - small bolts 4 - large bolts
2 - nylon ring spacer
2 - nylon block spacer
phillips head screwdriver
allen wrench (included)
Missing hardware? Please call 800.606.6387 for replacements.
(We recommend the use of hand tools instead of power tools)
COMPONENTS
1 – top and frame
2 – leg (1 left, 1 right)
1 – release handle
1 – base
1
Put the nylon ring spacer on
to the pin of
base.
NOTE: For the ease of next installation steps,
rotate the base
to have the back end rest on the oor as picture shows.
R
HAWORTH EDDY
TM
ADJUSTABLE HEIGHT DESK
Page 1 of 4
Made in China - r01 Page 2 of 3
Haworth Eddy Adjustable Height Desk
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2
Hook the bottom pivot hole of the
right leg to
the pin of
base.
NOTE: Make sure the
leg with bag hook on
the right hand as below picture shows..
3
Secure the large bolt by allen wrench to attach base with both legs.
4
Place top and frame onto a clean, padded surface. Dismantle the frame from the top by philips head screwdriver, keep the countersunk bolt for later step.
5
A) Put the release handle into slot of
the top adaptor of
the legs, the handle
direction should head to front.
B) Put the nylon block spacer into
the slot of the top adaptor of both
legs, right above the pin of release
handle.
R
HAWORTH EDDY
TM
ADJUSTABLE HEIGHT DESK
Page 2 of 4
Made in China - r01 Page 3 of 3
Haworth Eddy Adjustable Height Desk
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
6
Place frame on to the top adaptor of legs
and attached them
together with small bolt.
NOTE: Secure one
small bolt on each leg rst to get frame
and adaptor at the right matching on the screw holes. Then secure others.
7
Apply top on to the frame and
attach by
countersunk bolts.
8
Press release both
handles to adjust the table height if needed.
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the unit is nished with a protective clear lacquer.
CLEANING & CARE
R
HAWORTH EDDY
TM
ADJUSTABLE HEIGHT DESK
Page 3 of 4
R
HAWORTH EDDY
Haworth Eddy Adjustable Height Desk
TM
ADJUSTABLE HEIGHT DESK
USER INSTRUCTION
ADJUSTABLE HEIGHT - Gas cylinder for easy height adjustable from 650 mm up to 1020 mm
BAG HOLDER - to keep your valuables close to hand
LOW BASE - to t under virtually any chair
Mobility - so Haworth ® Eddy can be rolled away
SUSTAINABLE - Highly recyclable and manufactured to ISO 14001
TM
CAUTIONS!
HEIGHT ADJUSTMENT
1020 mm
650 mm
Max load of 35kgs on Haworth ® Eddy
Made in China - r01 Page 1 of 1
TM
Max load of 5kgs on the bag hook
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Release handle and make sure the height adjustability in parallel level
Lift Haworth ® Eddy front end gently when moving
TM
Move Haworth ® Eddy gently to avoid crashing into the wall or other objects
TM
Page 4 of 4
Loading...