Page 1
Customer Service 800-967-6696 | http://www.crateandbarrel.com
HAVANA WINE STORAGE CABINET
Thank you for purchasing the Havana Wine Storage
Cabinet. This page lists all the contents included in the
box. Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this
product.
COMPONENTS
1 - top assembly
1 - back panel
1 - bottom wine rack
1 - stem rack
3 - wine racks
Made in Indonesia - r03
HARDWARE
8 - medium screws3 - long screws 4 - short screws
3 - large
wood dowels
Missing hardware? Please call 800.606.6387 for replacements.
16 - small
wood dowels
TOOLS REQUIRED
Phillips head screwdriver (included)
1 - left side
frame
1 - right side
frame
Page 1 of 4
Page 2
Customer Service 800-967-6696 | http://www.crateandbarrel.com
HAVANA WINE STORAGE CABINET
A
1 A. Insert 1 large wood dowel in the right and left side
frames as shown.
B. Insert 1 large wood dowel into top of back panel.
3 Fit back panel into slot at rear of left side frame as
shown. Loosely attach with 2 medium screws. Do not
fully tighten the screws.
Made in Indonesia - r03
B
x 3
A
B
2 A. Insert 4 small wood dowels into the ends of each
of the 3 wine racks.
B. Insert 4 small wood dowels into the stem rack.
4 Align wood dowels of stem rack, 3 wine racks and
bottom wine rack with corresponding holes in the side
panel and fit into position. Loosely attach bottom wine
rack to side frame with 2 medium screws. Do not fully
tighten screws.
Page 2 of 4
Page 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
HAVANA WINE STORAGE CABINET
5 Fit right side panel onto dowels of the wine and stem
racks, and the back panel. Loosely attach bottom wine
rack with 2 medium screws and top of back panel with 1
medium screw. Do not fully tighten screws.
A
7 A. With the assistance of another adult, carefully place
assembly upright. Fit top assembly into position as
shown.
B. Insert 3 long screws at the rear of the top assembly
as shown and fasten with the phillips head screwdriver.
Made in Indonesia - r03
B
6 Remove drawer from top assembly by first unscrewing
the drawer stop located on the underside of the top.
Place the drawer aside.
8 A. Secure the side panels from the inside with 4 small
screws.
B. At this point fully tighten all screws from Steps 3-8
with the phillips head screwdriver. Do not over tighten
the screws.
Page 3 of 4
Page 4
Customer Service 800-967-6696 | http://www.crateandbarrel.com
HAVANA WINE STORAGE CABINET
9 Fit drawer assembly into case, aligning grooves on
drawer sides with rails in case interior.
Made in Indonesia - r03
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
10 Pull drawer out half way and insert drawer stop into
threaded hole on the underside of the top.
Assembly is now complete.
Page 4 of 4
Loading...