Crate & Barrel Havana Rectangular Mirror Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HAVANA RECTANGULAR MIRROR

Thank you for purchasing the Havana Rectangular
Mirror. This page lists all the contents included in

the box. Please take time to identify the hardware
as well as the individual components of this product.
As you unpack and prepare for hanging, place the
contents on a carpeted or padded area to protect
them from damage.
Note: 2 people are required to safely hang this
mirror.

TOOLS REQUIRED

Phillips head screwdriver

HANGING INSTRUCTIONS

Important Note:

The wall mounting hardware included with this mirror is intended for drywall installation only. Be sure to use
hardware appropriate for your wall type. Whenever possible, attach mounting hardware into a wall stud. If you are
unsure about your wall type or what mounting method you should use, consult a qualified professional or your local
hardware store.

1. Determine where you wish to hang the mirror and mark on the wall where the 2 anchors should be inserted. The
distance between the center points of the 2 keyhole hanging brackets is 34-3/16". Make sure the 2 marks are level.

2. Drill 2 holes that are slightly smaller in diameter than the size of the anchor, but 1/4" deeper than the length of the
anchor.

3. Insert 2 plastic anchors so that they are flush with the surface of the wall. Gently tap with a hammer if
necessary.

4. Insert the 2 screws into the plastic anchors, leaving approximately 1/4" of the screw projecting from the face of
the wall.

5. Hang the mirror on the screw heads, making sure that each screw head snugly engages the keyhole bracket
fittings.
Installation is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished with a protective clear lacquer.

Made in Indonesia - r03

HARDWARE

4 - bolts 2 - screws

Missing hardware? Please call 800.606.6387 for replacements.

2 - drywall
anchors

ASSEMBLY

Attach shelf to underside of mirror frame with 4 bolts. Secure with
a phillips head screwdriver.

Page 1 of 1