Page 1
Customer Service 800-967-6696 | http://www.crateandbarrel.com
HAVANA HUTCH
Thank you for purchasing the Havana Hutch. This
page
lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
to this product. As you unpack
COMPONENTS
2 - side panels 1 - front panel
1 - rail
1 - top panel
Made in Indonesia R03 Page 1 of 3
HARDWARE
6 - pan
head bolts
2 - L plates 8 - small
Missing hardware?
Please call 800.606.6387 for replacements.
16 - flat
head bolts
6 - small
wood screws
8 - large
wood screws
washers
22 - large
washers
TOOLS REQUIRED
Interchangeable Phillips/flat head screwdriver (included)
1 - back panel
1 - top shelf
1 - bottom shelf
Page 2
Customer Service 800-967-6696 | http://www.crateandbarrel.com
HAVANA
1
With assistance of another adult, carefully lay back
panel on padded surface. Align both side panels with
corresponding holes in back panel and loosely attach
with 8 flat head bolts and 8 large washers. Do not
fully tighten the bolts.
3
Loosely attach top panel with 6 pan head bolts with
6 large washers as illustrated. Do not fully tighten
bolts.
Made in Indonesia R03 Page 2 of 3
HUTCH
x6
x8
Fit front panel onto assembled unit and loosely attach
2
with 8 flat head bolts and 8 large washers. Do not
fully tighten bolts.
x4
4
Insert 4 flat head bolts with 4 large washers and
secure with a phillips head screwdriver.
At this point, fully tighten all bolts installed in Steps 1-4
with the phillips head screwdriver.
Page 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
HAVANA
HUTCH
5
Insert the bottom shelf, followed by the top shelf onto
the support rails, as illustrated above. Make sure the
groove is at the back of each shelf. Attach with 8
large wood screws and 8 small washers.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Made in Indonesia R03
6
With the assistance of another adult, place
assembly upright. Insert wood rail into brass
fittings on each side panel as shown.
Assembly is now complete.
Page 3 of 3
Loading...