Crate & Barrel Havana High Dining Table Assembly Instruction
HAVANA HIGH DINING TABLE
HARDWARE
Missing hardware? Please call
800.606.6387 for replacements.
4 - bolts
TOOLS REQUIRED
Thank you for purchasing the Havana High Dining Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
1 - tabletop
4 - legs
(hex bolts and washers attached
to pre-installed bolts on each leg)
Hex wrench (included)
Phillips head screwdriver
B
B
A
1 A) With the assistance of another adult, carefully place
tabletop face down onto a clean, padded surface. Detach
pre-attached hex nuts and washers from each leg, using a
hex wrench if necessary. Set hardware aside until further
instructions. Insert 4 legs into tabletop by aligning
corresponding holes and pre-installed bolts located on
1 - stretcher
Made in Indonesia R02 Page 1 of 2
Customer Service 800.967.6696 | www.crateandbarrel.com
legs.
B) Loosely attach with 2 hex nuts and 2 washers per leg.
Do not fully tighten until completely assembled.
HAVANA HIGH DINING TABLE
A
B
2 A) Attach stretcher onto legs on assembled unit.
Secure stretcher with 4 bolts using a Phillips head
screwdriver, but do not over tighten.
B) Fully tighten hex nuts on assembled unit with hex
wrench. Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Made in Indonesia R02 Page 2 of 2
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...