Customer Service 800-967-6696 | http://www.crateandbarrel.com
HAVANA CONSOLE
Thank you for purchasing the Havana Console. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are required to safely assemble this
product.
COMPONENTS
1 - table top
assembly
1 - shelf
2 - leg frames
(1 left, 1 right)
Made in Indonesia - r02
HARDWARE
4 - round head
screws
Missing hardware? Please call 800.606.6387 for
replacements.
8 - flat head
screws
2 - wood dowels
TOOLS REQUIRED
Phillips head screwdriver (included)
x 2
1 Place table top assembly upside down on a padded
surface. Remove drawer by pivoting 2 drawer stops into an
upright position as illustrated. Slide drawer out and set
aside.
Page 1 of 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
HAVANA CONSOLE
2 Insert 1 wood dowel in the right and left leg frames
as shown.
4 Fit right leg frame into position and loosely attach
with 2 round head screws. Do not fully tighten the
screws.
Made in Indonesia - r02
3 Place shelf into position, aligning holes in metal corner
brackets with holes in left leg frame. Loosely attach 2
round head screws through brackets and into the legs.
Do not fully tighten screws.
5 Align wood dowels of leg frames with corresponding
holes in the table top and fit into position.
Page 2 of 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
HAVANA CONSOLE
B
A
6 A. Secure leg frames with 4 flat head screws per leg
frame. Fully tighten each bolt with a phillips head
screwdriver.
B. At this point fully tighten all 4 round head screws that
attach the shelf with a phillips head screwdriver.
8 Rotate 2 drawer stops 180º to prevent drawer from
being removed. With the assistance of another adult
place the table upright. Assembly is now complete.
Made in Indonesia - r02
x 2
7 Slide drawer back into table top assembly, fitting slots
on drawer sides onto rails.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Page 3 of 3
Loading...