Crate & Barrel Grahm Console Table Assembly Instruction

GRAHM CONSOLE TABLE

HARDWARE

Thank you for purchasing the Grahm Console Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

8 - bolts 8 - flat

washers

3 - pulls 6 - pull

screws

Missing hardware? Please call 800.606.6387 for replacements.

4 - screws

TOOLS REQUIRED

phillips head screwdriver

allen wrench (included)

1 - tabletop

1 - crossbar
assembly

Made in China - r05 Page 1 of 2

Customer Service 800.967.6696 | www.crateandbarrel.com

4 - legs

GRAHM CONSOLE TABLE

NOTE: Make sure drawer
components of tabletop
are securely held
together when transporting
tabletop.

1 With the assistance of another adult, carefully place
tabletop upside down onto clean, padded surface.
Make sure drawer components of tabletop are
securely held together when transporting the tabletop.
Loosely attach 4 legs into tabletop with 2 bolts and 2
flat washers per leg as shown. Do not fully tighten
until further instructions.

2 Fit crossbar assembly into notches of leg assembly.
Secure crossbar assembly to assembled unit with 1 screw
per leg, using a phillips head screwdriver. Fully tighten all

bolts with an allen wrench.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.

3 With assistance of another adult, carefully position
unit upright. Attach 3 pulls to assembled unit with 2
pull screws per pull as shown. Secure screws with a
screwdriver.
Assembly is now complete.

Made in China - r05 Page 2 of 2

Customer Service 800.967.6696 | www.crateandbarrel.com