Crate & Barrel Gio 30 Barstool, Gio 24 Barstool Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

GIO 24" & 30" BARSTOOLS

Thank you for purchasing the Gio Barstool. This
page lists all the contents included in the box.
Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect
them from damage.

COMPONENTS

1 - seat

1 - leg frame

Made in Italy

HARDWARE

3 - allen screws

4 - feet

Missing hardware? Please call 800.606.6387
for replacements.

4 - leg mounts

TOOLS REQUIRED

Allen Wrench (included)

Hammer

Wide side
faces up

x 4

1 Attach 4 leg mounts to the leg frame. Fit split in mount over
tube and orient with the wider side up. Slide each mount as
close to the metal plate as possible.

Page 1 of 2

Customer Service 800-967-6696 | http://www.crateandbarrel.com

GIO 24" & 30" BARSTOOLS

2 Place leg frame upside down. Insert 4 feet in tube
ends, gently tapping with hammer if necessary.

x 3

4 Turn stool back over and fully tighten all allen screws
using the allen wrench provided.

Made in Italy

A

B

3 A. Loosely attach leg frame to seat bottom using 3 allen
screws. Do not fully tighten.

B. Stand the chair upright and make sure the seat is properly
aligned with the leg frame. Make any necessary adjustments.

5 Slide all 4 leg mounts away from the center and out
towards the legs until they can no longer be moved.
Assembly is now complete.

CLEANING AND CARE

Clean seat with a dry, soft cloth. Do not use abrasive
cleaners. Frame may be cleaned with a damp cloth.
Periodically re-tighten the allen screws.

Page 2 of 2