Crate & Barrel Geneva Black Hallway Organizer, Geneva Hallway Organizer Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

GENEVA HALLWAY ORGANIZER

Thank you for purchasing the Geneva Hallway
Organizer. This page lists all the contents included in the

box. Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this
product.

COMPONENTS

1 - shelf

1 - back panel

1 - top cap

Made in China - r06

1 - front
frame

2 - side
panels

1 - divider

1 - seat
panel

HARDWARE

4 - long
machine screws

10 - flat
head screws

Missing hardware? Please call 800.606.6387 for
replacements.

12 - short
machine screws

16 - flat
washers

3 - long pan
head screws

16 - split
washers

2 - short pan
head screws

5 - coat
hooks

TOOLS REQUIRED

Phillips head screwdriver

x 4

1 Fit dowels of 2 side panels into corresponding holes in
front frame as shown and fit into position. Attach each side
panel with 2 short machine screws, 2 split washers and 2
flat washers. Secure each with a phillips head screwdriver.

Page 1 of 3

Customer Service 800-967-6696 | http://www.crateandbarrel.com

GENEVA HALLWAY ORGANIZER

NOTE:

Do not over
tighten the screws.

2 Fit dowels of divider into corresponding holes of the

shelf as shown. Secure from below with 2 short pan
head screws. Fully tighten each screw with a phillips
head screwdriver. Do not over tighten the screws

4 Position seat panel over corresponding holes in the
case assembly. Attach with 4 long machine screws, 4
split washers and 4 flat washers. Secure all screws with
a phillips head screwdriver.

Made in China - r06

x 4

x 2

View from below

3 Position shelf assembly as shown and fit into side frame
assembly.

x 5

A

5 A. Attach top cap to top of the back panel with 3 long
pan head screws. Fully tighten with a phillips head

screwdriver.
B. Attach 5 coat hooks to the back panel with 2 flat head

screws per hook. Secure each screw with a screwdriver.

B

Page 2 of 3