Crate & Barrel Gazebo 48 5-Piece Dining Set, Gazebo 48 Dining Table Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

GAZEBO 48" ROUND TABLE

Thank you for purchasing the Gazebo 48" Round Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
NOTE: Two people are required to assemble this
product safely.

Leg Frame A

Leg Frame B

1 Fit leg frame A into notch of leg frame B.

Made in China - r03 Page 1 of 2

HARDWARE

8 - long bolts

1 - short bolt

Missing hardware?
Please call

800.606.6387 for
replacements.

COMPONENTS

1 - leg
frame A

1 - leg
frame B

1 - table top

TOOLS REQUIRED

1 - Allen wrench (included)

x 8

2 With the assistance of another adult, place the table top
upside down on a non-abrasive surface. Position holes in
legs over corresponding holes in table top. Secure legs to
table top with 2 long bolts per leg using the allen wrench
provided.
NOTE: Tighten each bolt a few revolutions at a time, applying
equal pressure to all bolt joints. Repeat until all bolts are tight.
Do not over-tighten. Over-tightening may strip bolts.

Customer Service 800-967-6696 | http://www.crateandbarrel.com

GAZEBO 48" ROUND TABLE

3 Secure leg assembly with 1 small bolt. Fully tighten with
allen wrench provided.

Made in China - r03 Page 2 of 2

CARE & CLEANING

Use mild soap and water to clean the table top & base. Do
not use abrasive cleaners or materials. For stain protection of
the tabletop, use a sealer designed for clay products.

4 With the assistance of another adult, place the table in an
upright position. Assembly is now complete.