Crate & Barrel Galerie Console Table Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

GALERIE CONSOLE

Thank you for purchasing the Galerie Console. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are required to safely assemble this
product.

COMPONENTS

1 - top

1 - middle shelf

1 - bottom shelf

1 - left
leg

Made in China - r04

1 - middle
leg

1 - right
leg

HARDWARE

12 - long bolts 12 - washers6 - short bolts

Missing hardware? Please call

6 - brackets

800.606.6387 for replacements.

TOOLS REQUIRED

Allen wrench (included)

1 Place top face down on a padded surface. Loosely attach

right leg with 2 short bolts and middle leg with 2 short
bolts. Make sure holes and slots on each leg face inwards.

Do not fully tighten the bolts.

Page 1 of 2

Customer Service 800-967-6696 | http://www.crateandbarrel.com

GALERIE CONSOLE

2 With the assistance of another adult, turn top assembly
on its side. Fit slots of middle shelf and bottom shelf into
corresponding slots on legs as shown.

4 With the assistance of another adult, turn table
assembly upside down. Attach 1 bracket at each leg and
bottom shelf intersection. Secure each with 2 long bolts
and 2 washers. Fully tighten with the allen wrench.

Made in China - r04

3 Attach left leg as shown, fitting leg slots into
corresponding slots in shelves. Loosely attach to top with
2 short bolts. Do not fully tighten the bolts.

x 6

5 Fully tighten all 6 short bolts with the allen wrench.
With the assistance of another adult, lift assembled unit
into an upright position. Assembly is now complete.

CARE & CLEANING

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.

Page 2 of 2