Crate & Barrel Galerie Cafe Table Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

GALERIE CAFE TABLE

Thank you for purchasing the Galerie Cafe Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect
them from damage.

COMPONENTS

1- mounting plate

1 - column

1 - tabletop

1- bottom foot

1- top foot

Made in China

HARDWARE

6 - spring washers

4 - short screws

2 - long screws

4 - cap screws

Missing hardware? Please call 800.606.6387
for replacements.

2 - wood
dowels

10 - flat washers

TOOLS REQUIRED

Allen wrench (included)

A

x 4

B

1 A. Fit mouting plate over threaded studs in top of column.
Secure with 4 cap screws and 4 flat washers. Fully tighten
each screw with the included allen wrench.
B. Insert 2 wood dowels in holes on underside of the column.

Page 1 of 2

Customer Service 800-967-6696 | http://www.crateandbarrel.com

GALERIE CAFE TABLE

2 Place tabletop upside down. Fit column into position by
inserting protruding bolts into large holes and aligning
screw holes. Using the allen wrench, secure with 4 short
screws, 4 spring washers and 4 flat washers.

4 With the assistance of another adult, turn the table
over. Adjust the levellers on the underside of the feet as
necessary to compensate for uneven floors.
Assembly is now complete.

Made in China

x 4

x 2

3 Fit together top and bottom feet as shown. Secure with
2 long screws, 2 spring washers and 2 flat washers.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer. Avoid placing
extremely hot or cold/wet items directly on the tabletop.

Page 2 of 2