Crate & Barrel Felix Side Chair Assembly Instruction
FELIX CHAIR
HARDWARE
Thank you for purchasing the Felix Chair. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
ASSEMBLY
plastic
spacer
top and
bottom
leg frame
NOTE: Make sure
the large hole of
each plastic spacer
is facing upwards.
A B
top leg
frame
large bolt
spring washer
1 - center
bolt
Missing hardware? Please call 800.606.6387 for replacements.
4 - large
bolts
5 - spring
washers
4 - plastic
spacers
TOOLS REQUIRED
allen wrench (included)
COMPONENTS
1 - bottom
leg frame
1 - seat
bottom leg
frame
top leg
frame
plastic
spacer
metal
disc
NOTE: Arrow indicates
the front of each leg frame.
1 - top
leg frame
cap
IMPORTANT: Center bolt
must be installed to secure
leg assembly
NOTE: Bolts should be
C
periodically tightened
4 - caps
center
bolt
spring
washer
A) Slide 2 plastic spacers onto
each leg frame as shown.
CLEANING AND CARE
Made in China - r04 Page 1 of 1
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
B) Place seat upside down onto a clean,
padded surface as shown. Align spacers of
top leg frame with corresponding metal discs
of seat as shown. Loosely attach top leg
frame with 2 large bolts and 2 spring
washers as shown.
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
C) Align spacers of bottom leg frame with
corresponding discs of seat as shown.
Loosely attach bottom leg frame with 2
large bolts and 2 spring washers. Loosely
secure top and bottom leg frame with 1
center bolt and 1 spring washer. Center
bolt must be installed to secure leg
assembly. At this point, fully tighten all bolts
with the allen wrench. Cover large bolts
with caps. Position unit upright.
Assembly is now complete.
Loading...