Crate & Barrel Felix Barstools Assembly Instruction

FELIX BARSTOOL (24” AND 30”)

HARDWARE

Thank you for purchasing the Felix Barstool (24” and
30”). This page lists all the contents included in the

box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.

ASSEMBLY

leg frame

4 - bolts 4 - spring

washers

Missing hardware? Please call 800.606.6387 for replacements.

4 - flat
washers

TOOLS REQUIRED

allen wrench (included)

COMPONENTS

1 - leg
frame

1 - seat

A. Place seat upside down onto a clean, padded surface as
shown. Align holes in leg frame over holes in bottom of seat
as shown.
B. Loosely insert 4 bolts, 4 spring washers and 4 flat
washers through holes in leg frame into seat as shown.
C. Make any necessary adjustments to the seat and frame.
Fully tighten all 4 bolts with the allen wrench. Position unit
upright. NOTE: Bolts should be periodically tightened.

Assembly is now complete.

large bolt

spring washer

flat washer

seat

NOTE:
Before assembly, carefully
remove all packaging to avoid
damage to seat and leg frame.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.

Made in China - r04 Page 1 of 1

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com