Crate & Barrel Farrow 65 Media Console Assembly Instruction
FARROW 65” MEDIA CONSOLE
Thank you for purchasing the Farrow 65” Media Console. This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
ASSEMBLY HARDWARE
30 - spring
washers
20 - small
screws
22 - small
flat washers
10 - large
screws
Missing hardware? Please call
800.606.6387 for replacements.
8 - large
flat washers
22 - small
bolts
WALL MOUNTING HARDWARE
4 - small
screws
4 - large
screws
2 - wall
straps
4 - wall
brackets
TOOLS REQUIRED
allen wrench (included)
phillips head screwdriver
(We recommened the use of hand tools instead power tools)
12 - shelf
pins
8 - large
bolts
4 - plastic
anchors
COMPONENTS
1 - top panel 1 - front frame
2 - side panels
(1 left, 1 right)
1 - bottom
panel
2 - partitions
(1 left, 1 right)
1 - back panel
3 - door fronts
4 - legs
Made in Vietnam - r02 Page 1 of 4
1 - support
leg
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - small
adjustable shelf
2 - large
adjustable shelves
FARROW 65” MEDIA CONSOLE
legs
A
A
NOTE: Do not over
tighten the bolts
B
suport
leg
bottom
panel
1 A) Place bottom panel onto a clean, padded surface.
Attach 4 legs to bottom panel with 2 large bolts, 2
spring washers and 2 large flat washers per leg as
shown. Secure, but do not over tighten, bolts using an
allen wrench.
B) Attach 1 support leg to bottom panel with 2 small
bolts, 2 spring washers and 2 small flat washers as
shown, using a phillips head screwdriver.
NOTE: Make sure crossbars
of side panels and partitions
are positioned as shown
left
B
partition
left side
panel
A
B
right
partition
A
right side
panel
2 A) With assistance of another adult, position bottom
panel as shown. Attach left and right side panels to
bottom panel with 3 large screws per side as shown.
Secure, but do not over tighten, screws using a phillips
head screwdriver.
B) Attach left and right partitions to bottom panel with 2
large screws as shown.
NOTE: Make sure crossbar
of top panel is positioned
towards the front of assembly
as shown.
top
panel
3 Fit pre-assembled dowels of left/right side panels
and partitions into corresponding holes of top panel.
Attach top panel to left/right side panels and partition
with 8 small bolts, 8 spring washers and 8 small flat
washers as shown, using a screwdriver.
front frame
4 With the assistance of another adult, position
assembled unit upright. Attach front frame to assembled
unit with 12 small bolts, 12 spring washers and 12
small flat washers as shown, using a screwdriver.
Made in Vietnam - r02 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...