Page 1
Ever Simple Crib Assembly Instructions
!
WARNING:
• Failure to follow these warnings and assembly instructions could result in serious injury or death.
• Read all instructions before assembling crib. Keep instructions for future use.
!
WARNING:
• For toddler bed use, the minimum age shall be no less than 15 months, and the maximum weight shall not be
greater than 50 lb (22.7 kg).
• Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an
infant.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless
otherwise advised by your physician.
Strangulation Hazard:
• Strings can cause strangulation! DO NOT place items with a string, cord or ribbon around a child’s neck, such as
hood strings or pacifier cords. DO NOT suspend strings over crib or toddler bed, or attach strings to toys for any
reason.
• To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners.
• DO NOT place crib or toddler bed near windows where cords from blinds or drapes may strangle a child.
Fall Hazard:
• When child is able to pull to standing position, set mattress to lowest position and remove bumper pads, large toys
and other objects that could serve as steps for climbing out.
• When child is able to climb out or reaches the height of 35 inches (90 cm), the crib shall no longer be used and the
child should be placed in a youth or regular bed.
CAUTION: ANY MATTRESS USED IN THIS CRIB
!
MUST BE AT LEAST 27-1/4 INCHES (69 cm) BY 51-5/8
INCHES (131 cm) WITH A THICKNESS NOT EXCEEDING
6 INCHES (15 cm).
• Check this product for damaged hardware, loose joints, missing parts or sharp edges before and after assembly and
frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are missing,
damaged, or broken. Contact Crate and Barrel® for replacement parts and instructional literature if needed. DO NOT
substitute parts.
• If refinishing, use a non-toxic finish specified for children’s products.
• Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
• Infants can suffocate in gaps between crib sides and a mattress that is too small.
• Periodically check to see that all bolts are securely tightened.
• To clean crib: Wipe with clean soft cloth dampened with a mild cleanser and water. Rinse with clean water using a
soft cloth, and dry thoroughly.
• Follow warnings on all products in a crib.
• When a vaporizer is in use, always aim vapor steam away from the crib as well as away from other wood furniture.
Made in China - r12
800.967.6696 | crateandbarrel.com
Page 2
Ever Simple Crib Assembly Instructions
This page lists the contents included in the box. Please take
time to identify the hardware as well as the individual
components of the product. As you unpack and prepare for
assembly, place the contents on a carpeted or padded area
to protect them from damage. Please follow the assembly
instructions closely. Improper assembly can result in
personal or property damage.
Note: 2 adults are required to safely assemble this product.
WARNING:
CHOKING HAZARD - SMALL PARTS
Small parts present in unassembled state.
Adult assembly required.
8 - Small
bolts
Made in China - r12
8 - Large
bolts
4 - End panel
bolts
1 - Allen wrench
800.967.6696 | crateandbarrel.com
2 - Left
support
brackets
2 - Right
support
brackets
12 - Lock
washers
Page 1 of 6
Page 3
Ever Simple Crib Assembly Instructions
2 - End panels
(1 - Left, 1 - Right)
Made in China - r12
2 - Side panels
1 - Mattress
support panel
Page 2 of 6
800.967.6696 | crateandbarrel.com
Page 4
Ever Simple Crib Assembly Instructions
left support
bracket
right support
bracket
right support
bracket
left support
bracket
1
Using an Allen wrench, attach 4 right and left support brackets to mattress support panel with 2 small bolts per
bracket as shown.
left end
panel
Attach side panel to left end panel with 2 large bolts and 2 lock washers as shown. Secure, but do not fully tighten,
2
Made in China - r12
with an Allen wrench. Repeat steps for remaining side panel as shown.
Page 3 of 6
800.967.6696 | crateandbarrel.com
Page 5
Ever Simple Crib Assembly Instructions
high
middle
NOTE: Make sure support
brackets are facing up
during assembly
low
3
Determine the desired height (low, middle, high) for the crib mattress. With assistance of another adult, fit mattress
panel into crib assembly as shown. Attach support brackets to left end panel with 1 end panel bolt and 1 lock washer
per bracket. Secure, but do not fully tighten, with an Allen wrench.
right end
panel
Attach right end panel to crib assembly as shown with 4 large bolts and 4 lock washers. Secure, but do not fully
4
Made in China - r12
tighten, with an Allen wrench.
Page 4 of 6
800.967.6696 | crateandbarrel.com
Page 6
Ever Simple Crib Assembly Instructions
right end
panel
5
With an Allen wrench, loosely attach each support bracket to right end panel with 1 end panel bolt and 1 lock washer.
At this point, fully tighten all bolts.
6
Made in China - r12
Carefully position crib upright as shown. Adjust levelers as necessary. Assembly is now complete.
Page 5 of 6
800.967.6696 | crateandbarrel.com
Page 7
Ever Simple Crib Assembly Instructions
CLEANINGANDCARE:
Cleansurfaceswithadryordampsoftcloth.Donotuseabrasivecleaners. Periodically check and tighten hardware as necessary.
Once the crib is in use, periodically check to make sure all bolts are tight, and tighten as necessary. Keep these
instructions for future use.
MAINTENANCE
Upon completion of assembly, be sure all screws, bolts and fastening devices have been tightened securely.
Periodically repeat this check to make sure all screws, bolts and fastening devices are tight. Before each usage or
assembly, inspect crib for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use crib if parts
are missing or broken. DO NOT substitute parts. DO NOT make any alteration to this crib.
CLEANING
Mix together a mild solution of gentle dishwashing liquid and water, apply to crib surface using a soft clean cloth
lightly dampened in the solution. Rinse with clean water again using a soft clean cloth, then dry all surfaces
thoroughly with a soft dry cloth. NO ABRASIVE CLEANERS, SCOURING PADS, STEEL WOOL OR COARSE RAGS
SHOULD BE USED TO CLEAN THIS FINE FURNITURE.
STORAGE
After completing the assembly process you are advised to read and beware of all WARNINGS, CAUTIONS,
CLEANING, STORAGE, USE AND MAINTENANCE notices contained in these instructions. For long term storage of
the crib, store in a cool, dry place and keep away from moisture and extreme temperature changes.
Made in China - r12
Page 6 of 6
800.967.6696 | crateandbarrel.com
Loading...