Crate & Barrel Essex Extension Dining Table Assembly Instruction

ESSEX EXTENSION DINING TABLE

HARDWARE

Thank you for purchasing the Essex Extension Dining
Table. This page lists all the contents included in the

box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.

Note: 2 people are required to safely assemble this product.

flat
washer

spring
washer

bolt

8 - bolts 8 - flat

washers

Missing hardware? Please call 800.606.6387 for replacements.

8 - spring
washers

TOOLS REQUIRED

allen wrench (included)

COMPONENTS

1 - tabletop 1 - leaf

1 With the assistance of another adult, place
tabletop face down onto a clean, padded surface.
Attach each leg to tabletop with 2 bolts, 2 spring
washers and 2 flat washers as shown. Fully
tighten all bolts with an allen wrench. Position
unit upright.
Assembly is now complete.

4 - legs

Made in Vietnam - r05 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

ESSEX EXTENSION DINING TABLE

EXTENSION LEAF INSTALLATION

A

OFF

ON

2 A) Locate the 2 metal clasps on the underside of the tabletop. Turn each clasp counter clockwise to unlock
as shown.
B) With the assistance of another adult, pull 2 tabletop sections apart. Place leaf into position, aligning metal
pins on leaf with matching locator holes. Push both tabletops towards the center.

B

EXTENSION LEAF STORAGE

NOTE: When storing the leaf into the extension table, make sure
the side of the leaf without pins is flush to the side of the tray to
allow proper closing of the table.

4 Remove leaf by unlocking clasps as shown. With the
tabletop fully extended, turn leaf 90º and place on
storage slats. Fit pins of leaf into corresponding holes of
tabletop as shown. Close tabletop sections and re-latch the

2 locking clasps. Extension leaf storage is now complete.

3 Re-latch clasps on underside of tabletop to the
leaf. Installation of the leaf is now complete.

Made in Vietnam - r05 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use abrasive

cleaners. Do not use furniture wax or polish as the wood is
finished with a protective clear lacquer.