Crate & Barrel Essex Bar Cabinet Assembly Instruction

ESSEX BAR CABINET

Thank you for purchasing the Essex Bar Cabinet. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

HARDWARE

8 - bolts

8 - spring

8 - shelf pins

washers

Missing hardware?
Please call 800.606.6387 for replacements.

COMPONENTS

4 - legs

TOOLS REQUIRED

allen wrench (included)

8- flat
washers

1 - cabinet
assembly

(2 adjustable
shelves provided
inside assembly)

shelf pin

flat
washer

spring
washer

bolt

adjustable
shelf

1 Remove adjustable shelves from cabinet assembly
and set aside until further instructions.
With the assistance of another adult, place cabinet
assembly upside down onto a clean, padded surface.
Attach each leg to assembly as shown with 2 bolts, 2

2 Insert 8 shelf pins into assembly at desired shelf
heights. Place adjustable shelves into assembly and
make sure each shelf is securely supported by each shelf
pin.
Assembly is now complete.

spring washers and 2 flat washers. Fully tighten all
bolts with an allen wrench. Position unit upright.

Made in Vietnam - r06 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

ESSEX BAR CABINET

REMOVING DRAWER DIVIDERS

3 Remove drawers from assembly. Using a screwdriver,
unfasten 1 screw from drawer side as shown. Remove
dividers. Store hardware and dividers. Position drawers
back into assembly.

Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use abrasive
cleaners. Do not use furniture wax or polish as the wood is
finished with a protective clear lacquer.

Made in Vietnam - r06 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com