Crate & Barrel Ellis Hutch Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

ELLIS HUTCH

Thank you for purchasing the Ellis Hutch. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this
product.

COMPONENTS

1 - door
assembly

1 - back
frame

1 - top
panel

2 - shelves

1 - left
side panel

Made in China - r06

1 - right
side panel

1 - bottom
panel

HARDWARE

24 - washers

10 - short
wood screws

2 - door pulls 2 - metal brackets

Missing hardware? Please call 800.606.6387 for
replacements.

24 - split
washers

8 - long
wood screws

16 - large
bolts

8 - small
bolts

8 - shelf pins

TOOLS REQUIRED

Phillips head screwdriver

B

A

x 8

x 4

B

1 A. With the assistance of another adult, lay door
assembly face down as shown. Fit right and left side
panels into position and attach with 4 large bolts, 4 split
washers and 4 washers per panel. Secure each screw with

a phillips head screwdriver.
B. Fit bottom panel into slot at base of door assembly. Make
sure slot on the bottom panel faces up and secure with 4
long wood screws.

Page 1 of 3

Customer Service 800-967-6696 | http://www.crateandbarrel.com

ELLIS HUTCH

x 8

A

B

2 A. With the assistance of another adult, place back
frame face up and position case assembly as shown. Insert

8 large bolts, 8 split washers and 8 washers through the
inside of side frames and secure each with a phillips head
screwdriver.
B. Fasten bottom panel to back panel with 4 long wood

screws. Secure with a phillips head screwdriver.

B

x 2

4 A. Insert 4 shelf pins per shelf at desired shelf height. Fit
2 shelves into the hutch assembly at an angle and place on
the shelf pins. Make sure each shelf is firmly supported by
the shelf pins.
B. Attach 1 door pull to each door with 3 short wood
screws. Secure each screw with a screwdriver.

Made in China - r06

A

x 4

A

x 8

View from below

3 With the assistance of another adult, place case assembly
upright. Position top panel over corresponding holes in the
case assembly. Insert 8 small bolts, 8 split washers and 8

washers and secure each with a phillips head screwdriver.

x 2

5 With the assistance of another adult, place the assembled
hutch on top of the assembled buffet. Secure both units
together with 2 metal brackets and 4 short wood screws as
shown. Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.

Page 2 of 3