Crate & Barrel Duplex Dining Table Assembly Instruction

DUPLEX TABLE

HARDWARE

Thank you for purchasing the Duplex Table. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

1 - top panel

4 - small
bolts

Missing hardware? Please call 800.606.6387 for replacements.

4 - large
bolts

4 - barrel
nuts

4 - wood
plug

TOOLS REQUIRED

allen wrench

(included)

(We recommend the use of hand tools instead of power tools)

phillips head screwdriver

ASSEMBLY

Make sure threaded
holes are aligned
vertically

left side
panel

right side
panel

1 - side panel

(1 right, 1 left)

1 - support panel

NOTE: Do not over
tighten the bolts

1 A) Insert 4 barrel nuts into support panel as shown.

support panel

VIEW FROM BELOW

With a screwdriver, align each nut so the threaded holes
are orientated as shown.
B) Attach left and right side panels to support panel
with 2 large bolts per side as shown. Secure, but do not
over tighten, bolts using an allen wrench.

Made in China - r02 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

DUPLEX TABLE

wood
plug

A

top panel

B

2 A) With the assistance of another adult, carefully place
top panel onto clean, padded surface. Fit assembled unit
onto corresponding wood blocks on top panel as shown.
Secure left and right side panels to top panel with 2
small bolts per side using an allen wrench.
B) Cover exposed bolts with wood plugs. Press firmly to
secure. With the assistance of another adult, position unit
upright.
Assembly is now complete.

wood
block

CLEANING & CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from
heat and water.

INSTRUCTIONS TO CLOSE TABLE

B

A

90º

A

180º

1 A) Fold left and right side panels 180º as shown.
B) Fold top panel 90º down as shown.

Made in China - r02 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com