DROP LEAF KITCHEN TABLE
HARDWARE
Thank you for purchasing the Drop Leaf Kitchen
Table. This page lists all the contents included in the
box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
2 - stop
bolts
Missing hardware? Please call
800.606.6387 for replacements.
TOOLS REQUIRED
allen wrench (included)
20 - small
bolts
stop
bolt
1 - tabletop
2 - legs (A)
1 - support frame
Made in Taiwan - r02 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 - legs (B)
1 With the assistance of another adult, place tabletop
upside down onto a clean, padded surface. Slide
support frames out and insert 2 stop bolts into tabletop as shown. Turn stop bolts clockwise to secure.
support
frame
DROP LEAF KITCHEN TABLE
leg
(B)
leg
(A)
B
A
B
leg
(A)
leg
(B)
A
2 Attach 2 legs (A) to corresponding label
on tabletop with 3 small bolts as shown.
Secure, but do not over tighten, bolts with
an allen wrench.
Repeat steps for legs (B).
support
frame
3 Attach support frame to leg assembly with 8
small bolts as shown. Make sure label on support rail
is facing the bottom of assembly. With the assistance
of another adult, position unit upright.
Assembly is now complete.
DROP LEAF
90º
support
frame
To release leaf, hold leaf steady and push support
frame into tabletop. Carefully, drop leaf into 90º
position. If desired, repeat steps for remaining leaf.
Make sure to release each leaf separately.
EXTEND LEAF
90º
support
frame
To extend leaf, lift leaf to a horizontal position and pull
out support frame. Make sure leaf is securely supported
by frame. If desired, repeat steps for remaining leaf.
Make sure to extend each leaf separately.
CLEANING AND CARE
Made in Taiwan - r02
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 2 of 2